RN55E10R0BRE6

Series:	Military, MIL-R-10509/7, RN55
Packaging:	Tape & Reel (TR)
Part Status:	Active
Resistance:	10 Ohms
Tolerance:	±0.1%
Power (Watts):	0.125W, 1/8W
Composition:	Metal Film
Features:	Flame Retardant Coating, Military, Moisture Resistant, Safety
Temperature Coefficient:	±25ppm/°C
Operating Temperature:	-65°C ~ 175°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.090" Dia x 0.240" L (2.29mm x 6.10mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are simple devices, designed to reduce the amount of current flowing in electronic circuits. They are used in a variety of applications, including power supply filtering, signal filtering, load resistance, voltage drop, and precision voltage division. The RN55E10R0BRE6 is a general-purpose precision resistor offered by Welwyn/TT Electronics. It has a leaded configuration in which the resistors are mounted in a hole and held in place with a nut. It is designed for reliable operation in a wide range of environments and is made of a special alloy material for a high temperature rating, excellent temperature coefficient of resistance, and good stability. The RN55E10R0BRE6 is a non-inductive resistor, usually defined as any resistor type which passes the same current in both directions (positive and negative). This means that the resistance current is not affected by the voltage or current direction. This makes it useful for applications where large currents, high voltages, and/or delicate circuits are present. In addition, non-inductive resistors are often used in switchmode power supplies (SMPS) and in power inverters. The RN55E10R0BRE6 through hole resistor has a resistance value of 10 ohms and a power rating of 1/4 watt (250mW). It is constructed with a single metal layer over a high temperature stable ceramic, and a nickel barrier to ensure electrical isolation and corrosion resistance. The resistor has a solderable lead for secure mounting and is rated for 0.1% accuracy. It is designed for an operating temperature range of -55 to +85°C and it meets the MIL-R-39023 and Telcordia (GR-487-CORE) standards. The working principle of the RN55E10R0BRE6 is based on the resistor\'s ability to control the flow of electric current through a circuit. This is done by converting some of the applied voltage energy into heat energy, which then dissipates into the surroundings. The amount of voltage converted into heat is dependent on the amount of resistance, which in turn is dependent on the material and design of the resistor. The resistance of the RN55E10R0BRE6 is 10 ohms, meaning that it must be rated for a minimum of 10 volts. The RN55E10R0BRE6 through hole resistor is well suited for a variety of applications, including low noise audio amplifier circuits, precision voltage dividers, signal line termination, amplifier bias supply networks, and PTC fuse protection. It can be used in switch-mode power supplies, AC switching applications, DC motor control, and computer telecommunications systems. The high temperature rating and excellent temperature coefficient of resistance make it ideal for high temperature or ambient temperature applications. Additionally, its non-inductive construction makes it suitable for use in delicate circuits. In conclusion, the RN55E10R0BRE6 is a precision resistor with a resistance value of 10 ohms and a power rating of 1/4 watt (250mW). It is fabricated with a single metal layer over a high temperature stable ceramic base, and has a nickel barrier for electrical insulation and corrosion resistance. The resistor is rated for 0.1% accuracy and is designed for an operating temperature range of -55 to +85°C. It is suitable for a variety of applications, including low noise audio amplifier circuits, precision voltage dividers, signal line termination, amplifier bias supply networks, and PTC fuse protection.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description