RN55E1202BRSL

Series:	Military, MIL-R-10509/7, RN55
Packaging:	Tape & Reel (TR)
Part Status:	Active
Resistance:	12 kOhms
Tolerance:	±0.1%
Power (Watts):	0.125W, 1/8W
Composition:	Metal Film
Features:	Flame Retardant Coating, Military, Moisture Resistant, Safety
Temperature Coefficient:	±25ppm/°C
Operating Temperature:	-65°C ~ 175°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.090" Dia x 0.240" L (2.29mm x 6.10mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are the most common type of resistors used today. They are manufactured in the same way as any other type of resistor, but they are designed to be mounted through a hole in the circuit board.The RN55E1202BRSL is a through-hole resistor that can be used in a variety of applications. It is an axial-leaded resistor, which means it has two leads in opposite directions. The RN55E1202BRSL has a maximum power rating of 200 mW, and a resistance of 100 kohm.The RN55E1202BRSL is commonly used in applications that require a very tight tolerance. It is suitable for use in high frequency applications as it has a high self-inductance. This means the RN55E1202BRSL will not affect the signal path of high-frequency circuits.The RN55E1202BRSL’s working principle is based on the fact that the resistance of the material inside the resistor changes with the applied voltage. This change in resistance is known as Ohm’s law.The material used in the RN55E1202BRSL is made of metal oxide, which has a linear relationship with the applied voltage. The resistance of any resistor is made up of a combination of its R-value, ESR (equivalent series resistance), and its tolerance. The R-value of the RN55E1202BRSL is 100 kohm. This is its nominal resistance, or nominal value. The tolerance of this resistor is ±5%. This means that the actual resistance of the resistor can be up to 5% more or less than the nominal value.The ESR of the RN55E1202BRSL can vary based on the construction of the resistor. The ESR is usually much lower than the R-value. The ESR is important for applications that require a low noise floor, such as audio circuits.In addition to its described uses, the RN55E1202BRSL is also widely used for general-purpose electronics projects. It is often used as a voltage divider in digital circuits, allowing a variable voltage input. The low ESR ensures that the output signal is clean and noise free.In summary, the RN55E1202BRSL is a through-hole resistor that is ideal for applications requiring a very tight tolerance. Its self-inductance makes it suitable for high frequency applications. Its low ESR makes it ideal for applications where noise needs to be minimized. The resistor is available in various resistance values, with a standard tolerance of ±5%.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description