RN55E2941DB14

Series:	Military, MIL-R-10509/7, RN55
Packaging:	Bulk
Part Status:	Active
Resistance:	2.94 kOhms
Tolerance:	±0.5%
Power (Watts):	0.125W, 1/8W
Composition:	Metal Film
Features:	Flame Retardant Coating, Military, Moisture Resistant, Safety
Temperature Coefficient:	±25ppm/°C
Operating Temperature:	-65°C ~ 175°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.090" Dia x 0.240" L (2.29mm x 6.10mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors The RN55E2941DB14 is a through hole resistor. A through hole resistor is a type of components used to provide resistance in an electrical circuit. It is a basic component of almost all electrical circuits and hence is highly useful in many fields. Through hole resistors have been one of the primary components used in the electronics industry for many decades.The RN55E2941DB14 through hole resistors has a typical wattage rating of 1/4 watt and a tolerance of 1%. It is a fixed resistor with an resistance of 291K ohms. The package dimensions of the RN55E2941DB14 are 0.4 inches by 0.4 inches. It has a typical power rating of 0.25 watts at 25 degrees Celsius and a maximum voltage rating of 100 volts.The RN55E2941DB14 is mostly used in electronic devices and circuits which require a resistor of this size and rating. It is usually used as part of a low power circuit such as a LED indicator light or a digital device. It can also be used as a component of a circuit which requires a precise resistance such as a voltage regulator or an audio mixer. In addition, it is also used in high frequency circuits and power amplifiers.The RN55E2941DB14 works by providing resistance to the electrical current flowing through it. It works on the principle of Ohm’s law, which states that the current through a resistor is directly proportional to the voltage applied to it. When the voltage is increased, the current increases. However, the resistance of the resistor ensures that the current does not exceed a certain limit. This allows the circuit to work efficiently and prevents damage to the components in the circuit due to excessive current.In summary, the RN55E2941DB14 through hole resistor is a relatively small component with an resistance of 291K ohms, a tolerance of 1% and a maximum voltage rating of 100 volts. It is mostly used as part of a low power circuit such as a LED indicator light or a digital device. It also works on the principle of Ohm’s law, allowing the current to be limited to a safe level.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description