RN55E4123BRE6

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are a type of fixed resistor which is made by winding a strip of conducting material around a core in a spiral formation. The RN55E4123BRE6 is a particular model of this type of resistor.

There are numerous different uses for through hole resistors. In general, they are used to control current, power, voltage, and other electric parameters. In particular, the RN55E4123BRE6 is used in sensors, automotive cameras, and high-end sound systems, amongst other things.

At the core of its working principle is Ohm\'s Law. This law states that the current (I) flowing through a material is proportional to the voltage (V) applied to the material, divided by the resistance (R) of the material. So the equation is V = I x R. By introducing a known resistance into a circuit, the voltage and current can be controlled.

The RN55E4123BRE6 is a surface mount (SMT) type resistor, as opposed to a leaded resistor or a chip resistor. It is composed of two semiconductor layers and a thin film in between them. These layers are separated by a thin gap, and current is allowed to pass through this gap when a voltage is applied. The resistance of this gap depends on the characteristics of the film and the type of semiconductor. By attaching leads to the two ends of the chip, the gap is closed, and the resistance is measured.

The RN55E4123BRE6 has five bands of color which indicate its value. The bands are read from left to right, and the value can be determined by using the code dictionary. This resistor can also handle high current and is RoHS compliant. It is typically used in situations where frequency or impedance is to be controlled.

In summary, the RN55E4123BRE6 is a surface mount through hole resistor. Its working principle is based on Ohm\'s Law, and it is used for controlling voltage, current, resistance, power, and frequency. It has a five-band system of color-coded values, which is used to decide the resistor\'s value. In addition, it can handle high current and is RoHS compliant.

The specific data is subject to PDF, and the above content is for reference