RN60C1601FB14

Series:	Military, MIL-R-10509/1, RN60
Packaging:	Bulk
Part Status:	Active
Resistance:	1.6 kOhms
Tolerance:	±1%
Power (Watts):	0.25W, 1/4W
Composition:	Metal Film
Features:	Flame Retardant Coating, Military, Moisture Resistant, Safety
Temperature Coefficient:	±50ppm/°C
Operating Temperature:	-65°C ~ 175°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.145" Dia x 0.344" L (3.68mm x 8.74mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to RN60C1601FB14

RN60C1601FB14 is a type of through hole resistor, which is commonly found in many electronic devices and components. The device\'s main application is in oscillators, and it also serves as a damping element to help suppress noise generated by higher frequency applications. This resistor also has a low resistance value of 1 ohm, which makes it suitable for applications that require a minimal amount of power. Additionally, the RN60C1601FB14 is also used as a shunt resistor to provide a better current ride-through capability in various circuits.

Description and Specifications of RN60C1601FB14

The RN60C1601FB14 is an axial-leaded through-hole resistor featuring a ceramic/mica substrate. It has a power rating of 2 watts, a 1 ohm resistance value and a tolerance rating of 5%. The resistor measures 4.77 mm in diameter and is 2.76 mm in length. It also has two insulated copper leads with a tin-plated finish. The operating temperature for this resistor ranges from -55 to +155 degrees Celsius.

Application Field of RN60C1601FB14

The RN60C1601FB14 is suitable for a variety of applications, including oscillators, damping elements and shunt resistors. As an oscillator, it is often used to produce high frequency signals, such as those found in radio transmitters. The resistor helps keep the generated signals steady and prevents them from becoming distorted. As a damping element, the RN60C1601FB14 is used to suppress excessive noise in applications involving high speeds. Finally, as a shunt resistor, it is used to provide extra stability to various circuits for improved current ride-through performance.

Working Principle of RN60C1601FB14

The working principle of the RN60C1601FB14 is based on the electrical resistance principle. Basically, when current runs through the resistor, it experiences a resistance that is proportional to the material\'s resistivity. The amount of power that is dissipated from the resistor is proportional to the voltage drop across it. Therefore, when the device is used as an oscillator, for example, the applied voltage determines the frequency of the output signal. Similarly, when the RN60C1601FB14 is used as a damping element, it helps reduce the amplitude of an oscillator\'s signal. As a shunt resistor, it absorbs excess current to ensure that all of the components in a circuit are supplied with the same amount of current.

Safety Considerations

When working with the RN60C1601FB14, it is important to consider safety precautions. The device can become extremely hot during operation, so it is important to wear safety gloves or other protection when working with it. Furthermore, it is important to ensure that the resistor is installed properly to ensure optimal operation. Finally, do not be tempted to adjust the resistor\'s settings, as this could damage the device.

Conclusion

In conclusion, the RN60C1601FB14 is a type of through-hole resistor that is most commonly used in oscillators and damping elements, as well as shunt resistors. The device has a resistance value of 1 ohm and a power rating of 2 watts, and is suitable for a wide range of applications. When working with the RN60C1601FB14, it is important to consider safety considerations such as wearing protective gear and avoiding altering its settings.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description