RN65D1121FB14

Series:	Military, MIL-R-10509/2, RN65
Packaging:	Bulk
Part Status:	Active
Resistance:	1.12 kOhms
Tolerance:	±1%
Power (Watts):	0.5W, 1/2W
Composition:	Metal Film
Features:	Flame Retardant Coating, Military, Moisture Resistant, Safety
Temperature Coefficient:	±100ppm/°C
Operating Temperature:	-65°C ~ 175°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.180" Dia x 0.562" L (4.57mm x 14.27mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors

Through hole resistors, also known as through-bore resistors, are the most common type of resistors that come in a variety of shapes, sizes and resistance ratings. Through hole resistors have two leads that extend through the hole in the large base. The two extended leads make connection to the circuit easy and reliable. Through hole resistors are available in a wide range of resistances from around 0.1 Ohms to 100K Ohms, or even higher.The RN65D1121FB14 is a through hole resistor. It is a 1.2 Ohm resistor with a maximum power rating of 2 Watts and a maximum working voltage of 250 Volts. It is available in a number of different resistive values, such as 0.5 Ohms, 1 Ohm, 1.2 Ohms, 1.5 Ohms, 2 Ohms, 2.2 Ohms, and 3 Ohms. The RN65D1121FB14 through hole resistor is designed for use in applications that require high-power rating and high-voltage.The most common applications of the RN65D1121FB14 through hole resistor include power-supply units, automotive systems, power amplifiers, televisions, and other automotive electronics. This type of resistor is commonly used in the automotive industry, for applications such as automotive power distribution, power amplifiers, and other automotive electronics. It is also used in medical imaging and computer control systems.The working principle of the RN65D1121FB14 through hole resistor is based on the use of resistor elements. These resistor elements are made of a conductive material, such as a metal. The resistance of the resistor is determined by the length of the element and the cross sectional area of the element. When current passes through the resistor, it produces heat that is dissipated into the surrounding environment. This heat is used to reduce the overall resistance of the resistor, which in turn reduces the amount of current that passes through the resistor.The RN65D1121FB14 through hole resistor is manufactured using a specialized process. The process starts with the use of metal resistors that are cut down to specific lengths and cross sectional areas. The resistors are then placed in a holder and soldered onto a printed circuit board. After the soldering is complete, the resistor elements are tested to make sure that the resistor has the desired resistance, power rating, and working voltage. The finished resistor is then ready to be installed into a device or circuit.Through hole resistors, such as the RN65D1121FB14, are essential components in many electronics and electrical devices. They are very reliable and provide accurate and consistent resistance levels. They are used in a wide variety of applications, from power supply units, amplifiers, and automotive systems, to medical imaging and computer control systems.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description