RN65D5232FRSL

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors

Through hole resistors, also known as axial resistors, consist of a cylindrical body with resistive material on it and two electrically conductive (leads) extending from each side. The ends of the leads are bent at a right angle (90°) to facilitate secure placement in the mounting holes of printed circuit boards, hence the name “through-hole”. The RN65D5232FRSL is a common example of a through-hole resistor.

Application Field of RN65D5232FRSL

The RN65D5232FRSL is a through-hole resistor designed for use in low-sensitivity applications. It has a resistance value of 5.23kΩ and is rated for a power dissipation of 1/4 Watt. It is ideally suited for resistive voltage divider circuits and similar applications where a low degree of accuracy is acceptable.

Working Principle of RN65D5232FRSL

The RN65D5232FRSL resistor is a passive component. It works on the principle of an electric current passing through a resistor, which causes the current to be resisted, or reduced. This resistance of the current is measured in ohms, and the value of the resistance will determine how much current passes through the resistor. The RN65D5232FRSL resistor is 5.23kΩ, which means that a current of 5.23kΩ will pass through it when it is connected in series with an electric circuit.

The RN65D5232FRSL resistor works in two ways. First, the resistor offers a resistance between two points on the circuit, sometimes referred to as the “voltage drop”, which controls the current flowing through the resistor and prevents it from exceeding the safe limits in the circuit. Second, the resistor dissipates the excess energy produced by the circuit as heat, preventing the circuit from becoming overloaded.

The RN65D5232FRSL resistor follows Ohm\'s Law, which states that the current in a circuit is proportional to the voltage applied across it multiplied by the resistance. This means that for a given voltage, the current in a circuit can be increased by decreasing the resistance, or decreased by increasing the resistance.

The RN65D5232FRSL resistor is a through-hole component and is usually mounted on the surface of a printed circuit board. The two legs are inserted into the pre-configured holes on the board and then bent at a right angle to complete the assembly. Once the resistor is in place, the circuit will function as designed.

Conclusion

The RN65D5232FRSL resistor is a through-hole resistor designed for use in low-sensitivity applications. It has a resistance value of 5.23kΩ and is rated for a power dissipation of 1/4 Watt, making it ideal for resistive voltage divider circuits and similar applications. The resistor follows Ohm\'s Law and works by controlling the current that passes through it and dissipating the excess energy as heat. It is usually mounted on the surface of a printed circuit board, with the two legs inserted into the pre-configured holes and then bent at a right angle to complete the assembly.

The specific data is subject to PDF, and the above content is for reference