RN70D2700FB14

Series:	Military, MIL-R-10509/3, RN70
Packaging:	Bulk
Part Status:	Active
Resistance:	270 Ohms
Tolerance:	±1%
Power (Watts):	0.75W, 3/4W
Composition:	Metal Film
Features:	Flame Retardant Coating, Military, Moisture Resistant, Safety
Temperature Coefficient:	±100ppm/°C
Operating Temperature:	-65°C ~ 175°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.180" Dia x 0.562" L (4.57mm x 14.27mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Through Hole Resistors are a type of resistor used to limit current flow in an electrical circuit. A Through Hole Resistor consists of a ceramic material, typically a mixture of non-metallic and metallic compounds, encased in a metal housing. There are many different configurations of Through Hole Resistors, with resistance values ranging from 5 ohms up to several hundred kilohms. The RN70D2700FB14 is one type of Through Hole Resistor, designed for high current applications such as motor controllers and power supplies.

Application Field and Working Principle

The RN70D2700FB14 is an axial lead through hole resistor designed for high current applications, with a maximum power rating of 7 watts. Due to its high current capabilities, it is ideal for use in motor controllers, robotics, and other applications where current needs to be regulated. The RN70D2700FB14 is also well-suited for use in power supplies, such as for voltage regulation circuits or as part of a flyback transformer.The RN70D2700FB14 resists current using a ceramic material in the resistor core, encased in a metal housing for protection and to help dissipate the heat generated when current flows through it. The resistor material consists of a metallic and non-metallic mixture that works by increasing its resistance as the current flow through it increases, which acts to prevent too much current from flowing through the circuit. The higher the resistance of the resistor, the more current is limited.

Conclusion

The RN70D2700FB14 is a Through Hole Resistor designed for high current applications. This type of resistor is ideal for motor controllers, power supplies, robots, and other applications where current needs to be regulated. It resists current using a ceramic material encased in a metal housing, and its resistance can be adjusted depending on the required application. The RN70D2700FB14 is an excellent choice for applications where current regulation is necessary.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description