RN70E1471FB14

Series:	Military, MIL-R-10509/3, RN70
Packaging:	Bulk
Part Status:	Active
Resistance:	1.47 kOhms
Tolerance:	±1%
Power (Watts):	0.75W, 3/4W
Composition:	Metal Film
Features:	Flame Retardant Coating, Military, Moisture Resistant, Safety
Temperature Coefficient:	±25ppm/°C
Operating Temperature:	-65°C ~ 175°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.180" Dia x 0.562" L (4.57mm x 14.27mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors

Through hole resistors are components in an electronic circuit that are used to convert electrical energy into heat energy. The current that flows through a resistor is dissipated in the form of heat energy, and the resistor also serves to limit the maximum voltage of a circuit. Through hole resistors tend to have higher power ratings than surface-mount resistors, and are often used in high-power applications such as supplying power to power supplies, high-power audio amplifiers, and when control or protection circuits require higher current capacity. The RN70E1471FB14 is a through hole resistor with a power rating of 14 watts.

The RN70E1471FB14 is a general-purpose, through hole resistor that is available in a range of different resistance values from 0.25 ohms to 1.2K ohms. The resistor is designed for use in applications such as high-power audio devices, power supplies, and automotive applications. The resistor has a wide operating temperature range of -40°C to 155°C. It also has a high fault current rating, which means it can be used in a variety of applications without fear of exceeding the maximum rated fault current of the resistor.

In addition to its high power rating and fault current rating, the RN70E1471FB14 is also designed with a special construction technique that allows for improved heat dissipation. This construction method, which is known as “wave soldering”, allows for improved solder joint strength and superior heat dissipation compared to regular through hole resistor designs. This means that the RN70E1471FB14 can be used in high-power applications for longer amounts of time without overheating and potentially damaging the circuit.

The working principle of the RN70E1471FB14 is relatively straightforward. When a current passes through the resistor, it creates a voltage drop that can be determined by Ohm’s law. For instance, in a circuit with a 1 ohm resistor, the voltage drop would be equal to 1V for every 1A of current. As the current increases, the voltage drop increases and the heat energy produced by the resistor increases as well. The resistor’s construction method allows for improved heat dissipation, which means that the resistor can handle higher currents for longer periods of time without overheating and damaging the circuit.

The RN70E1471FB14 resistor is a versatile and durable component that can be used in a variety of high-power applications. It is designed to handle a range of different voltages, current, and power levels, and has a wide operating temperature range and a high fault current rating. Thanks to its special wave soldering construction method, it can also dissipate heat effectively, allowing it to be used in high-power applications for longer amounts of time without overheating and damaging the circuit.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description