RNR60H5113FSB14

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through hole resistors are devices which are used to interrupt the flow of electrons in an electrical circuit in order to control the amount of current that passes through it. The RNR60H5113FSB14 is a commonly used type of through-hole resistor. It has a very low power rating of 2W and a very high voltage rating of 1KV. It is an axial resistor, meaning that it has two terminals which are connected to each other, each with a lead wire coming out of one end.The RNR60H5113FSB14 is typically used in applications where a high voltage is required and a small amount of current is necessary. The resistor acts as a barrier against the flow of current, preventing it from exceeding a certain level. This prevents damage to the components and circuits. The resistor is generally used in products such as DC motors, heaters, lighting, aerospace, and telecommunications.The RNR60H5113FSB14 works based on the principle of Ohm’s Law. According to this law, the amount of current that passes through an electrical circuit is proportional to the voltage applied to it. The voltage is measured in volts, while the current is measured in amperes. By placing a resistor in the circuit, it lowers the voltage across the circuit, thus lowering the amount of current that can pass through it.The RNR60H5113FSB14 is generally made of ceramic and has two contacts which are connected to one another. The leads are connected to the outer contacts and the connection is made with a copper tape, usually soldered to the contacts. The resistance value of the resistor is set by the width and diameter of the copper tape. The copper tape is coated with a thin layer of paint in order to protect the tape from the environment and to increase the accuracy of the resistance value.The RNR60H5113FSB14 is also known as a “fixed value resistor” because its resistance value cannot be changed. It has a low power rating which makes it suitable for applications where only a small amount of current is needed. This makes it ideal for use in low voltage circuits, such as those found in consumer electronics and automotive applications.The RNR60H5113FSB14 is a reliable and highly efficient device which is used in a variety of applications. It is relatively inexpensive and can handle high amounts of voltage with great accuracy. It is also very durable and has a long service life. Therefore, it is one of the most commonly used through-hole resistors, and is an essential component in many types of electrical circuits.

The specific data is subject to PDF, and the above content is for reference