RNV14JTL10M0

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are an important type of component, which are found in many electronic circuits. The RNV14JTL10M0 is an example of such a component, and in this article we shall look at this resistor in detail, including it’s application field and working principle.

The RNV14JTL10M0 is a through hole resistor, which is designed for a wide range of applications. It is a leaded device, which means that the resistor is mounted on the board through a hole in the board, and leads are soldered to the solder side of the board, allowing for easy handling of the resistor. The RNV14JTL10M0 is designed to withstand high temperature operation, allowing it to be used in high temperature environments, such as in automotive applications. The resistor is also resistant to moisture, allowing it to be used in high humidity environments.

The RNV14JTL10M0 is designed to handle up to 10 milliamps of current. This allows it to be used in applications that require a large amount of current, such as amplifiers, motor controllers, power supplies, and other high current applications. The resistor also has a wide working voltage range, from 9 volts to 28 volts, allowing it to be used in high voltage applications.

The RNV14JTL10M0 resistor is made of a high quality ceramic material, which ensures that the resistor is resistant to vibration and shock. The device is also rated to withstand up to 2000 volts, which makes it suitable for use in high voltage applications. The resistor is also designed to dissipate heat quickly, allowing efficient operation and long life of the device.

The RNV14JTL10M0 is designed with a four-terminal construction, allowing for a precise application of current and voltage on the resistor. This is achieved by the four terminals that are connected to the device, with one terminal at ground and the other three terminals connected to the active current path. This arrangement allows for accurate application of current and voltage to the resistor, and also helps reduce the risk of arcing or sparking, which can lead to damage or faults in the circuit.

The working principle of the RNV14JTL10M0 through hole resistor is based on the Ohm\'s law, which states that the voltage across the resistor is directly proportional to the current through it. Thus, when current passes through the resistor, the voltage across it will increase, and as the voltage increases, the resistance of the resistor increases, allowing it to handle more current. This helps protect other components in the circuit from damages due to excessive current.

RNV14JTL10M0 through hole resistors are designed for a wide range of applications, including automotive, industrial, and consumer applications. The device\'s high temperature resistance, high voltage tolerance, and fast heat dissipation make it suitable for use in these applications. The device is also designed with a four-terminal construction, allowing for precise application of voltage and current to the resistor, which helps protect other components in the circuit from damage or failure. It is therefore a very versatile component, and can be used in many different applications.

The specific data is subject to PDF, and the above content is for reference