RNX05010M0JKEB

Series:	RNX
Packaging:	Tape & Reel (TR)
Part Status:	Active
Resistance:	10 MOhms
Tolerance:	±5%
Power (Watts):	1.2W
Composition:	Metal Oxide Film
Features:	Flame Proof, High Voltage, Safety
Temperature Coefficient:	±100ppm/°C
Operating Temperature:	-55°C ~ 225°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.140" Dia x 0.540" L (3.56mm x 13.72mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to Through Hole Resistors

Through Hole Resistors are components used in many electronic devices to control electrical flow. These components, sometimes referred to as “resistor elements”, are typically made of conductive materials such as carbon, metal oxide, or metal film. The purpose of through hole resistors is to reduce the amount of current flowing through circuit components, in order to protect the circuit components from overheating.

RNX05010M0JKEB Application Field and Working Principle

The RNX05010M0JKEB is a through hole resistor specifically designed for use in high performance circuit designs. This component is commonly used in power electronics and high frequency switching applications. It is designed for both surface mount and through hole applications and is rated for a maximum continuous operating voltage of 260V and a maximum operating temperature of 150°C. The working principle of the RNX05010M0JKEB is relatively simple. It consists of two metal plates, or electrodes, that are insulated from each other by a non-metallic layer, usually ceramic. The resistance is determined by the size of the plates and the thickness of the non-metallic layer. When the current flows into one plate, it will not be able to pass through the ceramic layer, and will be forced to travel across the surface of the other plate, creating a resistive load. As the input current increases, the through hole resistor gradually becomes saturated, and the output voltage will begin to drop off.

Conclusion

Through hole resistors are important components of electronic circuits, as they are capable of controlling the current levels passing through circuit components, protecting them from overheating. The RNX05010M0JKEB is a through hole resistor specifically designed for use in power electronics and high frequency switching applications. It is designed for both surface mount and through hole applications and is rated for a maximum continuous operating voltage of 260V and a maximum operating temperature of 150°C. The working principle of the RNX05010M0JKEB is relatively simple, consisting of two metal plates insulated from each other by a non-metallic layer. As the input current increases, the through hole resistor gradually becomes saturated, and the output voltage will begin to drop off.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description