ROV05H331K-S-2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Varistors, also called voltage-dependent resistors (VDRs), are a group of non-linear electronic components which have a variable electrical resistance that changes with applied voltage. The ROV05H331K-S-2 is a transient voltage suppression device. It is designed to prevent electrical components from experiencing shocks or powerful surges in power. This article will discuss the application field and working principle of the ROV05H331K-S-2.

The ROV05H331K-S-2 is a surge protection device used for protecting circuits, which are subjected to high voltage transients, from destruction. Its applicability varies from transient voltage suppression (TVS) for DC power rails and secondary protection for TVS-capable clamp devices. This device can be used for various applications such as automotive, consumer, industrial, and telecom/data communication.

The ROV05H331K-S-2 is a high-efficiency suppression device used in high voltage applications. As a transient voltage suppression device, it is designed to protect circuits from transients, noise, and surges. When the surge current exceeds the withstand rating of the component, this device will absorb the excess energy. In doing so, it mitigates the risk of catastrophic failure due to a damaging surge and noise. The ROV05H331K-S-2 is especially useful for applications that are exposed to unpredictable surges, particularly if the surge current is very large.

The ROV05H331K-S-2 is a metal-oxide-based varistor. This varistor is capable of absorbing up to 10,000 watts of energy but can also smoothly release the stored energy over time. This ensures that the voltage drop across it is kept minimal, which in turn helps the system to remain stable while the surge is being absorbed. The high efficiency and low level of voltage drop make the ROV05H331K-S-2 suitable for protecting both AC and DC circuits.

The working principle of the ROV05H331K-S-2 is relatively simple. When an electrical transient or surge is present on a circuit, the varistor reacts to the increased voltage by quickly absorbing the energy. The stored energy is then gradually released over a period of time, allowing the protected system to remain stable. This is because the stored energy is released at a much lower rate than it was initially absorbed. This helps to prevent the voltage across the protected components from becoming too high.

The ROV05H331K-S-2 is a powerful and reliable surge protection device that can be used in a variety of applications. It is suited for high voltage applications, as its high efficiency and low voltage drop reduce the risk of system damage and failure. It is also suitable for both AC and DC circuits. As a result, the ROV05H331K-S-2 can be used in a wide variety of applications, from automotive and consumer electronics to industrial and telecom systems.

The specific data is subject to PDF, and the above content is for reference