ROV05H431K-S-2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The technology of overvoltage protection is becoming more and more mature. The ROV05H431K-S-2 is a tvs or Transient Voltage Suppressor, which is a type of varistor that can protect components from overvoltage. It is widely used in all kinds of electronic equipment in order to improve the safety, reliability and performance of the system it is installed in.

The ROV05H431K-S-2 is designed primarily to protect components from ESD (electrostatic discharge) and other electrical transients. When subjected to a sudden surge in voltage, it acts as a current-limiting element and quickly dissipates the energy of the transient. This prevents the components from receiving a large voltage surge, which can cause damage.

The ROV05H431K-S-2 works by controlling the flow of current when an overload or surge occurs. It uses an Non-Linear Junction (NLJ) to provide both an overvoltage protection and a varistor effect, which controls the current-flow through the circuit. The NLJ consists of two back-to-back Schottky diodes connected in parallel, with the anode of one diode connected to the cathode of the other in a reverse direction.

The junctions of the NLJ create a low voltage drop by “clamping” the applied voltage between the zener breakdown voltage (Vz) and the breakdown voltage of the reverse junction (Vr). As the voltage applied across the NLJ increases, it begins to conduct current and limits the voltage to Vz. This results in a change in the capacitance of the NLJ, which is what causes the varistor effect.

The ROV05H431K-S-2 also acts as a clamping device, and is able to dissipate a large amount of energy in a short amount of time. It is composed of a negative temperature coefficient Resistor (NTCR) and Non-Linear Junction (NLJ), which work together to provide the necessary protection from overvoltage. The NTCR provides a fast turn-on time for the device and the NLJ provides a current-limiting effect.

To provide the necessary protection, the ROV05H431K-S-2 needs to be selected for its specific voltage and current rating. It is typically installed between the power supply and the load, so that it can limit the voltage supplied to the load if an overload or surge occurs. The device can be connected in series, parallel or a combination of both, depending on the specific application.

The ROV05H431K-S-2 is designed for use in a variety of different applications, including automotive, power supplies, computers and consumer electronics. In addition to providing overvoltage protection, it can also be used to provide noise suppression, and to reduce electromagnetic interference. It is a versatile and reliable component that can help ensure the safety and reliability of many different electronics systems.

The specific data is subject to PDF, and the above content is for reference