ROV10H241K-S-2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

ROV10H241K-S-2 is a type of large size TVS (transient voltage suppression) designed to protect sensitive electronics components from lightning and other electrical over stresses. It is a MOV (metal-oxide varistor) which is made of sintered together zinc oxide pieces and other metallic particles. It is intended to be used in conjunction with other components to provide a high level of electrical over-voltage protection in applications such as AC power connectors, circuit board traces, and boards.

For use in these applications the ROV10H241K-S-2 must be carefully designed for proper functioning. To be effective, it must be placed near the electronic load it is intended to protect. The size of the device and its connection points must be designed for high power and thermal loads. The maximum voltage and current ratings of the ROV10H241K-S-2 must also be taken into account when making design decisions.

The working principle of the ROV10H241K-S-2 is relatively simple. When it senses an over-voltage condition, it begins to clamps on the voltage and lower the peak voltage that can reach the load, thus protecting it from damaging voltages and currents. The device has a voltage rating of 230 volts AC and a current rating of up to 10kA peak 8/20μs. It also has a maximum operational temperature of 125 C and a response time of less than 1ns.

When it comes to applications of the ROV10H241K-S-2, it is often used in a wide range of AC and DC powered electronic equipment such as power supplies, telecommunication systems, consumer electronics, and LED lighting. It can also be used in automotive, marine, and aviation applications. The device is typically connected to the load to be protected via the chassis ground.

Because of its small size and low profile design, the ROV10H241K-S-2 is well-suited for use in cramped or enclosed spaces. It is also designed to be used in conjunction with other components to provide more comprehensive overvoltage protection in more complex systems. This device is also easily integrated into system designs, making it a popular choice for both industrial and commercial applications.

In summary, the ROV10H241K-S-2 is a type of large size MOV designed to protect sensitive electronics components from electrical over stresses. It has a voltage rating of 230 volts AC and a current rating of up to 10kA peak 8/20μs. It also has a maximum operational temperature of 125 C and a response time of less than 1ns. It is typically used in a range of AC and DC powered electronic equipment for protection from overvoltage conditions.

The specific data is subject to PDF, and the above content is for reference