ROV10H241K

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TVS (transient voltage suppressor) components represent a special type of components that are used to protect against various types of overvoltages. The overvoltage protection they provide is an important component in the design of circuits in order to ensure that circuits are safe, reliable, and free of any destructive potential. MOV (metal oxide (varistor)) and Varistor represent two types of TVS components that each have their own purpose and characteristics.

MOVs are specific devices that are used for the protection of wiring, hardware, and electronic components from dangerous and destructive transient events. They are made of a metal oxide material that is designed to resist the high power and voltage transients that are often caused by lightning strikes and power surges. These components are designed to absorb and dissipate energy to avoid damage to associated circuits and components. They generally have a breakdown voltage of 16 to 40 volts and require a peak pulse current rating of 3 kA or higher. They can also come in a variety of sizes and variations.

Varistors, on the other hand, are non-linear voltage dependent components that are used for voltage regulations. They are made of a ceramic material and usually have a breakdown voltage of 5 to 11 volts. They are especially useful for protecting against high frequency transients as they have excellent clamping capabilities. Varistors also have low capacitance values which makes them suitable for protection against ESD (electrostatic discharge).

The ROV10H241K is an example of a varistor component used for overvoltage protection. It has an operating voltage rating of 10VDC and a clamp voltage rating of 270VDC. It has a fail-safe rating of 2000Amps, a peak pulse current rating of 80KA, and a pulse disipation energy rating of 55J. This component can be used in a variety of applications, including consumer electronics, automotive, industrial, medical, and telecom applications.

The working principle of the ROV10H241K is not complicated. When normal AC and DC voltage is below its operating voltage of 10V, the varistor will stay in its non-conductive state. However, when a surge of voltage above its breakdown voltage of 270V occurs, the varistor will become conductive and dissipate the surge energy into the ground. This will effectively limit voltage and protect circuits and components from dangerous overcurrents.

In conclusion, the ROV10H241K is an example of a varistor that can be used for overvoltage protection. It offers excellent protection against high-power pulses, ESD, and voltage transients. It has a wide variety of applications and can be used for consumer electronics, automotive, industrial, telecom, and medical applications, all while being cost-effective and easy to use. The working principle of the ROV10H241K is relatively simple: it will remain in its non-conductive state until an overvoltage surge occurs, at which time it will become conductive and dissipate the surge energy into the ground.

The specific data is subject to PDF, and the above content is for reference