ROV10H680K-S-2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The ROV10H680K-S-2 is a type of Transient Voltage Suppressor (TVS) and is more specifically a Metal Oxide Varistor (MOV). MOVs are a class of varistors, which are non-linear electronic components used to clamp transient voltage spikes in order to protect vulnerable components in circuits. This particular type of MOV is a silicon-based rectifying unit that consists of a higher junction area and is designed to displace excess voltage away from protected electrical components and into locations where it can safely dissipate.

In order to understand the workings of the ROV10H680K-S-2, it is important to discuss the principles of a MOV device. MOV devices are essentially made up of multiple electrodes and source and drain resistors. The electrodes are designed to absorb any excess voltage and the source and drain resistors are there to route current to these electrodes. When exposed to a voltage above a certain threshold, the MOV will divert the current through the electrodes, reducing the voltage and preventing it from damaging the protected circuitry.

The ROV10H680K-S-2 application field is primarily used to protect electrical components in various types of consumer and commercial electronics. Examples include audio and video equipment, data storage devices, automotive applications, and electric and communication systems. In addition, the ROV10H680K-S-2 is often used to protect vulnerable circuits and components in high-voltage and high-current applications. For instance, it can be used to reduce power surges in appliances, computers, and other electronics that use high voltages.

In terms of the ROV10H680K-S-2\'s working principle, the main aim is to absorb excess voltage or current and divert them elsewhere. This is achieved by the device\'s built-in electrodes, which are designed to react whenever the incoming voltage or current exceeds the allowable threshold. When this happens, the MOV acts as a resistor, allowing current to flow to the electrodes and dissipating it away from the protected circuits and components. As a result, the circuits and components are not damaged by the transient voltage spike.

Therefore, the ROV10H680K-S-2 is a highly reliable and effective solution for protecting electrical components and circuits from damage caused by power surges and voltage spikes. It is ideal for a wide range of consumer and commercial electronics applications and can be used to protect vulnerable circuits and components from high currents and voltages. With its superior performance and dependability, the ROV10H680K-S-2 is the perfect solution for any electronics maintenance and protection requirements.

The specific data is subject to PDF, and the above content is for reference