ROV14E361K-S-2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TVS - Varistors, MOVs are used to provide surge protection in electrical systems. The ROV14E361K-S-2 is a varistor device designed to protect against high transients on the power line. It is constructed from a zinc oxide ceramic material which has a very high varistor voltage rating of 14V and a clamping voltage rating of 36V. The device is capable of handling up to 10 kilovolts of peak transient voltage spike, with a maximum dynamic current rating of 1.3kA.

The varistor device works by clamping the transient voltage that is produced by an inductive transient in the power line. An inductive transient, or \'spike\' is a very short burst of electrical energy produced by sudden changes in the load current, such as caused by switching a large motor or an arcing contact on an electrical switch. These transients can cause damage to sensitive electronic components such as integrated circuits, so the ROV14E361K-S-2 is designed to provide protection by clamping the voltage to a safe level.

The varistor device works by connecting the two terminals of the device between the power line and ground. When an inductive transient is detected, the device begins to absorb the current, and the voltage across the terminals begins to rise. When the voltage reaches the clamping voltage level, the device reaches a saturation point and will begin to limit the current flow through the device. This effectively \'clamps\' the voltage so that it is at a safe level for the electronic components that are connected to the power line.

The device also offers a very fast response time to transients, allowing it to protect against even very short duration transients. In addition, it can handle up to 10 kilovolts of peak transient voltage spike without being damaged, making it suitable for applications where extreme spikes are expected. The high current rating ensures that the device can handle even very large current spikes without being damaged.

The ROV14E361K-S-2 is designed for use in a wide range of applications including communications, computer, and consumer electronics. It is designed to provide reliable protection for equipment against transients and surges on the power line. The device can also be used in industrial equipment, automotive systems, and even solar panel systems.

In summary, the ROV14E361K-S-2 is a varistor device designed to protect against high transients on the power line. It is constructed from a zinc oxide ceramic material which has a very high varistor voltage rating of 14V and a clamping voltage rating of 36V. The device is capable of handling up to 10 kilovolts of peak transient voltage spike, with a maximum dynamic current rating of 1.3kA. It also has a very fast response time, making it suitable for applications where extreme spikes are expected.

The specific data is subject to PDF, and the above content is for reference