RP08-4812SAW

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC-DC converters are one type of power electronic converters that convert a DC power source into a different DC power level based on SP08-4812SAW application field and working principle.The RP08-4812SAW is a type of quarter bridge converter. It is used to convert a DC voltage from one level to a higher level. It has an input voltage of 12V and an output voltage of 48V. The converter has an output power of 100W and a switching frequency of 400kHz. The converter also has a high efficiency rating of over 90%.The working principle of RP08-4812SAW converter is based on the concept of voltage bucking and boosting. When the device is in buck mode, the output voltage is lower than the input voltage. When the device is in boost mode, the output voltage is higher than the input voltage. This type of DC-DC converter draws its input power from a 12V DC power source. The RP08-4812SAW buck-boost converter uses a full-bridge MOSFET topology. In order to convert the input voltage to the desired output voltage, two MOSFETs are used. The first MOSFET works as a high-side switch and the second MOSFET works as the low-side switch. The two MOSFETs are driven by a two-level PWM signal. This PWM signal is generated by a dedicated pulse width modulator IC, which is typically an integrated circuit. The pulse width modulator IC produces an output current equal to the input current with very small error.When the high side switch is ON and the low side switch is OFF, the input voltage is applied to the output terminal. This is known as the boost mode. When the low side switch is ON and the high side switch is OFF, the output voltage is inverted and reduced in magnitude. This is known as the buck mode. The pulse width modulator IC continuously monitors the output voltage and adjusts the pulse width accordingly.The RP08-4812SAW is used in a wide variety of applications. It can be used as a power supply for electric vehicles, portable medical and industrial equipment, LED drivers, and other electronic systems. It can also be used as a component in higher voltage power conversion systems. In conclusion, the RP08-4812SAW is a type of DC-DC converter that can be used to convert a DC voltage from one level to a higher level. It works based on the concept of voltage bucking and boosting and is driven by a two-level PWM signal generated by a dedicated pulse width modulator IC. It has a high efficiency rating and is used in a wide variety of applications.

The specific data is subject to PDF, and the above content is for reference