RP10-2412SE/N/M1 Power Supplies - Board Mount

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC-DC Converters are a type of device used to control and switch direct current (DC) power from one voltage level to another. One specific type of DC-DC Converter is the RP10-2412SE/N/M1 converter. This converter is a single-stage, high-efficiency DC-DC switching converter, capable of providing a voltage-adjustment ratio from 1:2 to 1:20, with an output voltage adjustable within a range of 0-24V. It is used in applications including battery-powered devices such as cell phones and in server applications, solar systems, audio amplifiers, automotive systems, and for LED lighting.The primary purpose of the RP10-2412SE/N/M1 converter is to convert a lower input voltage to a higher output voltage which can be adjusted within a range of 0-24V. This device typically operates in a buck voltage boost circuit topology, achieving a step-up voltage conversion ratio between 1:2 and 1:20. The converter is designed for a wide range of input and output conditions. It operates with input voltages between 4.5V and 24V, providing regulated output voltage adjustable between 0 and 24V and an efficient output current of up to 0.7A.When powered on, the RP10-2412SE/N/M1 converter utilizes a low dropout linear regulator which quickly achieves stable output voltage. It implements a synchronous rectifier circuit which reduces the power loss and achieves a high efficiency of up to 94%. This converter also integrates a high-efficiency critical conduction mode (CCM) Buck regulator to achieve a nominal voltage gain of up to 20V. To protect against overload or short circuit conditions, the RP10-2412SE/N/M1 converter provides an integrated over-current protection (OCP) circuit, as well as an integrated thermal protection (TP) circuit.The RP10-2412SE/N/M1 converter can be controlled by an external control voltage or can be programmed to work in a fixed voltage mode. The external control voltage can also be used to adjust the output voltage through the continuous control pin input (CCS). The device also provides low-power shutdown and inhibit modes. If low-power shutdown mode is enabled, the minimum current draw is 0.02mA. Inhibiting the device will ensure the output voltage is set to 0V.In summary, the RP10-2412SE/N/M1 DC-DC converter is designed for a range of applications where a range of output voltages are needed; such as, battery-powered devices, audio amplifiers, solar systems, server applications, automotive systems, and LED lighting. It provides high efficiency operation with a wide range of input and output conditions. It also provides several integrated protection features.

The specific data is subject to PDF, and the above content is for reference