RP10-4824SAW/P

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC DC Converters are used in a wide variety of applications, from the power supply for automotive electronics to telecom equipment and computers. The RP10-4824SAW/P is a new DC-DC converter, which is available in both the surface mount and through-hole packages.

The RP10-4824SAW/P converter has an input voltage range of 8V to 80V, and an output voltage of 0.6V to 5V. This device is designed with a special automatic power-on reset function and power-saving mode. In addition, the device has a built-in overtemperature protection (OTP) circuit and an accurate power management loop.

The RP10-4824SAW/P is ideal for a wide range of applications, from automotive, consumer electronics, security systems, and industrial applications. This DC-DC converter is also highly reliable and can be used in different environmental conditions. This converter can be used at temperatures up to 85℃.

The working principle of the RP10-4824SAW/P is based on a buck converter circuit. This is a type of DC-DC converter that is capable of converting a higher input voltage into a lower output voltage. Basically, this type of converter uses an inductor, two switches, and two capacitors to achieve the required reductions and voltage matching. The two switches, which are probably MOSFETs, are controlled in a way that alternately connect and disconnect the inputs and outputs of the converter.

The working of the RP10-4824SAW/P converter starts when the user gives a signal of adequacy of voltage to the converter. This signal is sent by the power protection circuit, which is present inside the converter. The control circuit receives this signal and then triggers the switching process which is necessary to convert the higher input voltage to a lower output voltage. The switching process is done by the two MOSFETs, which turn On and Off alternatively. The On and Off of these MOSFETs are done with the help of a pulse width modulation (PWM) signal, which is generated by the control circuit of the converter. The PWM signal is set in such a way that it matches the required output voltage.

Once the output voltage is set, the converter maintains the current and voltage level of the power supply to the load. This is done with the help of another control circuit that is present in the converter. This detections control circuit monitors the voltage level of the output and provides feedback to the PWM signal generator, which then controls the MOSFETs according to the feedback. This process helps the converter to provide an accurate and stabilized output voltage, even during large input voltage fluctuations.

Apart from adjusting the output voltage, the RP10-4824SAW/P also maintains the level of current coming out of the converter. This is done by a special current-limiting circuit that is present in the device. This circuit monitors the current flowing out of the converter and adjusts the PWM signal to ensure that the current remains at a certain level.

The RP10-4824SAW/P is a highly efficient DC-DC converter with a wide input voltage range and a low noise output. The unique features of this converter make it ideal for various industrial, automotive, and telecom applications. The built-in OTP circuit and power-saving mode provide high levels of safety and reliability, allowing this device to be used in a wide variety of applications.

The specific data is subject to PDF, and the above content is for reference