RP100H-11015SRW/P

Current - Output (Max):	6.7A
Supplier Device Package:	Half Brick
Size / Dimension:	2.40" L x 2.28" W x 0.50" H (61.0mm x 57.9mm x 12.7mm)
Package / Case:	Half Brick
Mounting Type:	Through Hole
Efficiency:	91%
Operating Temperature:	-40°C ~ 105°C (With Derating)
Features:	Remote On/Off, OCP, OTP, OVP, SCP, UVLO
Applications:	ITE (Commercial), Railway
Voltage - Isolation:	3kV
Power (Watts):	100W
Series:	POWERLINE RP100-RW
Voltage - Output 4:	--
Voltage - Output 3:	--
Voltage - Output 2:	--
Voltage - Output 1:	15V
Voltage - Input (Max):	160V
Voltage - Input (Min):	43V
Number of Outputs:	1
Type:	Isolated Module
Part Status:	Active

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC-DC Converters are used to convert current and voltage from one level to another. The RP100H-11015SRW/P is an example of such a converter. It is designed to convert DC power from a higher voltage to a lower voltage, or from 24 volts to 12 volts, for a variety of applications. This paper will discuss the application field and working principle of the RP100H-11015SRW/P DC-DC converter.The RP100H-11015SRW/P is often used in automotive, industrial, and commercial applications. It is particularly well suited for vehicle and equipment electronics because it offers efficient and reliable power conversion. Its wide input voltage range allows for versatile use of the converter in a variety of applications. It provides a maximum output current of 10 Amps and a maximum output power of 100 Watts, making it suitable for a variety of applications that require up to 100 Watts of power.The RP100H-11015SRW/P DC-DC converter is based on a buck converter topology. A buck converter is a switching regulator circuit which converts a higher voltage to a lower voltage. At the heart of the buck converter is an inductor, which is used to store energy and reduce ripple current. In a buck converter, an AC voltage is applied to the circuit at its input, and a switch is used to control the flow of current through the inductor. When the switch is open, the inductor will store energy and when the switch is closed it will release the stored energy to the load, resulting in the conversion of the voltage.In the RP100H-11015SRW/P, the buck converter uses metal-oxide semiconductor field-effect transistors (MOSFETs) as the switching element. The MOSFETs are controlled by a pulse-width modulation (PWM) signal in order to adjust the output voltage of the converter. The output voltage is monitored by a feedback loop which compares the output voltage to a reference voltage and adjusts the duty cycle of the PWM signal accordingly. The output voltage is also stabilized by a slow control loop which acts to reduce the output voltage ripple. The RP100H-11015SRW/P also has several features such as overvoltage and overcurrent protection to protect the converter from damage caused by unexpected power surges.In conclusion, the RP100H-11015SRW/P is a highly efficient and reliable DC-DC converter designed for use in a variety of applications including automotive, industrial, and commercial applications. It is based on a buck converter topology which utilizes MOSFETs as the switching elements and a feedback loop to control the output voltage. The RP100H-11015SRW/P also has several safety features to protect it from damage due to unexpected power surges. The converter offers a maximum output current of 10 Amps and a maximum output power of 100 Watts, making it well suited for a variety of needs.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description