RP15-4815DA-HC

Current - Output (Max):	500mA, 500mA
Size / Dimension:	1.00" L x 1.00" W x 0.39" H (25.4mm x 25.4mm x 9.9mm)
Package / Case:	6-DIP Module, 4 Leads
Mounting Type:	Through Hole
Efficiency:	88%
Operating Temperature:	-40°C ~ 85°C
Features:	OCP, OVP, SCP
Applications:	ITE (Commercial)
Voltage - Isolation:	1.6kV
Power (Watts):	15W
Series:	POWERLINE RP15-A
Voltage - Output 3:	--
Voltage - Output 2:	-15V
Voltage - Output 1:	15V
Voltage - Input (Max):	75V
Voltage - Input (Min):	36V
Number of Outputs:	2
Type:	Isolated Module
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC DC Converters

DC-DC converters are power devices that convert one DC voltage level to another. They are widely used in the electronics industry because they are convenient, efficient and flexible. The RP15-4815DA-HC is a type of DC-DC converter that has numerous applications and serves various purposes.

Applications of the RP15-4815DA-HC

The RP15-4815DA-HC is mainly used in applications such as aerospace, telecoms, transport, defense, medical and industrial. This converter has two operating modes, hot-swap and PWM (pulse-width modulation), which allow it to be used in a wide variety of DC applications. In addition, the device can be used as a DC-DC controller to regulate various currents, thus enabling it to be used in high-power systems. The RP15-4815DA-HC can also be used for point-of-load (POL) applications. This converter is suitable for use in applications that require different voltages and currents. As a result, the RP15-4815DA-HC can be used in systems with multiple power requirements when high efficiency, high precision and low noise are needed.

Working Principle of the RP15-4815DA-HC

The RP15-4815DA-HC is an isolated, single-stage DC-DC converter that uses switched-mode techniques to convert a DC voltage level from an input voltage to an output voltage. This converter is designed to provide high efficiency and low noise power conversion.The working principle of the RP15-4815DA-HC is based on a full bridge buck-boost converter circuit. The converter uses two switches – a low side and a high side – to convert the input voltage to a desired output voltage. The output voltage is then adjusted using a Pulse Width Modulation (PWM) control scheme.The RP15-4815DA-HC includes several features that make it suitable for applications with high-power DC requirements. These features include a Constant Voltage/Constant Current (CV/CC) feature, Soft-Start function, Over-Voltage protection, Over-Current protection and thermal shutdown protection.

Conclusion

The RP15-4815DA-HC is a power device designed to convert one DC voltage level to another. This converter is suitable for use in many applications, including aerospace, telecoms, transport, defense, medical, industrial and point-of-load. It is also designed to provide efficient power conversion with low noise and can operate in both hot-swap and PWM control modes. The working principle is based on a full bridge buck-boost converter circuit, and it also includes several features such as CV/CC, soft-start, over-voltage and over-current protections, and thermal shutdown protection.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description