Number of Pins:	8
Height - Seated (Max):	0.024" (0.60mm)
Size / Dimension:	0.126" L x 0.063" W (3.20mm x 1.60mm)
Supplier Device Package:	1206
Package / Case:	1206 (3216 Metric), Convex, Long Side Terminals
Mounting Type:	Surface Mount
Applications:	--
Operating Temperature:	-55°C ~ 155°C
Temperature Coefficient:	±200ppm/°C
Power Per Element:	62.5mW
Series:	RP
Resistor-Ratio-Drift:	--
Resistor Matching Ratio:	--
Number of Resistors:	4
Tolerance:	±5%
Resistance (Ohms):	2.2k
Circuit Type:	Isolated
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RP164PJ222CS Resistor Networks, Arrays

Resistor networks and arrays are passive components that are essential to any electronic circuit. The RP164PJ222CS is a surface-mount resistor network, also known as an array, that is used in a variety of applications. This component provides four separate networks of two resistors each, and is made up of two resistors in parallel and two resistors in series. In this article, we will discuss the applications and working principles of the RP164PJ222CS.The first main application of this component is as an intermediate device between the power source and the load. It can be used in circuits to reduce the voltage passing through the load, or to limit the current supplied to the load. This is especially useful when dealing with high voltages and currents, as it adds an extra layer of protection to the load. In addition, it can be used to match the load\'s impedance with the power source\'s impedance, allowing for efficient power transfer between the two.The RP164PJ222CS also has applications in filters, as it can be used as a low-pass filter, high-pass filter, or bandpass filter. These filters allow for the transfer of only a certain frequency range of signals, which can be useful for signal processing. They are also used in analog signal conditioning, as well as for wave shaping and frequency shifting.The working principle of the RP164PJ222CS is relatively simple. The two resistors in series form a voltage divider, while the two resistors in parallel form a current limiter. When the power source is connected to the component, the voltage divider will divide the voltage across the two resistors, while the current limiter will limit the current flowing through the two resistors. The resistor network will then control the amount of current and voltage that reaches the load, allowing for the desired result.In conclusion, the RP164PJ222CS is a versatile component that has a wide range of applications. It is used as an intermediate device between the power source and the load, as well as in filters, signal conditioning, and wave shaping. Its working principle is based on two voltage dividers and two current limiters, which combine to create a component that can regulate voltage and current. Ultimately, this component can be used in many different applications to provide a secure and efficient power transfer between the power source and the load.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description