RP30-4805SE-HC

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC-DC converters, or DC-DC regulators, refer to a type of circuitry that is used to control and convert the voltage between a `high\' DC voltage and a `low\' DC voltage. The most commonly used type of DC-DC converter is a buck-boost type, which is used to step down or step up the voltage. The RP30-4805SE-HC is a high-performance buck-boost DC-DC converter, designed to convert input voltages of 5V up to 60V and deliver output voltages adjusted between 0.85V and 40V with a power range of up to 120W.

The RP30-4805SE-HC is a component in a DC-DC converter that is designed for a variety of applications, such as digital signal processors, data converters, and embedded systems. The device is integrated with various features, making it a perfect choice for applications that require a combination of both high efficiency and a wide input voltage range.

The RP30-4805SE-HC has a wide range of features, including its 100KHz switching frequency, fixed-frequency current mode control, as well as external synchronization. It is also equipped with over-temperature, short-circuit, and overcurrent protection features.

The device is designed for an extended operating temperature range, ranging from -40°C to +125°C, allowing for reliable operation in harsh environmental conditions. This makes the RP30-4805SE-HC perfect for use in applications that require a wide temperature range, such as automotive electronics and industrial automation.

The working principle of the RP30-4805SE-HC is based on a buck-boost configuration. This means that the device operates by taking in a high voltage (VIN) and adjusting it to a lower voltage (VOUT). The device is also capable of performing the reverse operation, taking in a low voltage (VIN) and adjusting it to a higher voltage (VOUT).

The device works by using two switches connected in series with an inductor. When switch 1 is open, the device acts as a boost converter and charges the inductor; when switch 2 is open, the device acts as a buck converter and the voltage is discharged. The output voltage is regulated by modulating the duty cycle of the switches. The regulated output voltage can be adjusted with an external potentiometer or input voltage level sensing circuit.

The RP30-4805SE-HC is an efficient buck-boost DC-DC converter, which is designed for a variety of applications. It has features including a 100KHz switching frequency, fixed-frequency current mode control, external synchronization, over-temperature, short-circuit, and over-current protection. It has a wide temperature range and is capable of up to 120W of power conversion. The operating principle of the RP30-4805SE-HC is based on a buck-boost configuration, making it an ideal choice for applications requiring a combination of both high efficiency and a wide input voltage range.

The specific data is subject to PDF, and the above content is for reference