RP75H-2415SRW/N-HC

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC-DC converters, such as the RP75H-2415SRW/N-HC, are a type of electrical circuits used to convert one type of direct current (DC) electrical signal to another. DC-DC converters are commonly used in applications where the voltage output of the power source may not match the requirements of the device the power is being delivered to, or where the load demands an isolated power source. The RP75H-2415SRW/N-HC DC-DC converter is a switchmode power supply (SMPS) based on a full-bridge resonant LLC topology.

The main components of the RP75H-2415SRW/N-HC DC-DC converter are two MOSFETs, two diodes, an LLC resonant tank type coil, and a high-frequency control transformer. The switching action is provided by the two MOSFETs, which are connected to the DC power source. When the MOSFETs are closed, the DC voltage is applied to the LLC resonant tank. The LLC resonant tank and diodes form an LC resonant circuit, which vibrates at the resonant frequency of the tank. When the resonant frequency matches the frequency of the DC input, the resulting voltage across the MOSFETs is zero, allowing for minimum power loss.

The LLC resonant tank coil, diodes, and transformer are used in combination to provide voltage and current regulation. The high-frequency transformer allows the current to be regulated without the need for a large-value inductor. The diodes are used to block the output voltage from increasing beyond the maximum allowed, while the transformer is used to provide primary-side voltage regulation.

The RP75H-2415SRW/N-HC DC-DC converter is commonly used in automotive, industrial, and renewable energy applications. In automotive applications, the DC-DC converter is used to help power sensors, audio systems, lights, and other electronics. In industrial applications, the DC-DC converter is used to provide power to motion control systems, machine tools, and robotic systems. In renewable energy applications, the DC-DC converter helps to convert the power generated by photovoltaic panels, wind turbines, and hydroelectric systems. The DC-DC converter can also be used to provide power to electric vehicles.

In terms of working principle, the RP75H-2415SRW/N-HC DC-DC converter works by converting the input voltage into a higher or lower output voltage. The DC-DC converter steps up or steps down the input voltage depending on the type of converter used. The input voltage is first rectified and then is applied to the switchmode power supply, which uses the switching action of the MOSFETs to create a resonant tank. The resonant tank, diodes, and transformer then regulate the current and voltage output to make sure that it meets the requirements of the application.

The RP75H-2415SRW/N-HC DC-DC converter is a reliable and efficient power source that is suitable for a wide range of applications. It is able to convert DC voltage of 24-75V to a regulated output of 12-15V, and can deliver up to 75A of current. The DC-DC converter also has a low profile design, making it suitable for applications where space is limited. The RP75H-2415SRW/N-HC DC-DC converter is reliable and efficient, and is a great choice for a wide range of applications.

The specific data is subject to PDF, and the above content is for reference