RPMD20-2405SFW/N

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC DC converters are electrical devices used to supply a specified amount of voltage range to a load. Depending upon their design, they can either power unregulated systems, or regulated power systems. In the unregulated system, the voltage range produced is dependent on the line voltage and current draw of the load, as well as on the type of power device used to supply the load current. In the regulated system, the voltage range between the output and input of the power supply is maintained at a specified value, so that the load receives the correct amount of power without any variation. The RPMD20-2405SFW/N is a DC DC converter which is designed to provide reliable, high quality power for a wide range of applications.

The RPMD20-2405SFW/N is a DC/DC converter, operated from an input voltage of +4.6V to +5.5V. It offers a wide output voltage range of 20V to 24V and is capable of providing up to 5000W of power. Additionally, it includes a switching frequency range of 150kHz to 700kHz for optimal efficiency. It also features current limiting and over-temperature protection to provide increased reliability.

The RPMD20-2405SFW/N is suitable for a variety of industrial, automotive, communication and other applications. It is especially designed for use in applications where high voltage and high power are required, such as in high-end servers, communication systems and power supplies. The relatively low power requirements of the device make it suitable for use in smaller systems as well.

As far as the working principle of the RPMD20-2405SFW/N is concerned, it is best understood with the help of the block diagram shown in Figure 1. The device consists of two main parts, the power stage and the control stage. The power stage is composed of an inductor, a switching element and a synchronous rectifier. The control stage consists of a FET, a voltage reference, an error amplifier and an oscillator.

In operation, the input voltage is sensed by the voltage reference, and it provides an error signal to the control stage. The error signal is used to control the on/off switching of the switching element. When the voltage reference senses a lower input voltage, it commands the switching element to turn on, which causes the inductor to store energy in the form of a magnetic field. When the voltage reference senses a higher input voltage, it commands the switch element to turn off, which causes the inductor to release the stored energy. The released energy is then used to drive the synchronous rectifier, which converts the alternating current from the inductor to a direct current.

The RPMD20-2405SFW/N is a high quality DC DC converter, which offers reliable, efficient and cost-effective power for a variety of applications. It is ideal for use in applications where high voltage and high power are required, such as in high-end servers, communication systems and power supplies. Additionally, the relatively low power requirements of the device make it suitable for use in smaller systems as well. In short, the RPMD20-2405SFW/N is an excellent choice for providing reliable, high performance power for a variety of applications.

The specific data is subject to PDF, and the above content is for reference