RPMD30-4812SEW/N

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC DC Converters

DC DC Converters are a type of power electronic circuit that converts direct current (DC) from one voltage level to another. This type of converter is usually used as an interface between a power source and an electronic load. It is also used in applications where an alternating current (AC) signal is required from a DC source. A DC DC Converter is a device that can be used to step up, step down, Buck, Boost, Isolate, or even invert a DC voltage signal.

RPMD30-4812SEW/N Application Field and Working Principle

RPMD30-4812SEW/N is an integrated DC-DC converter. It is a small, high-performance, and low-cost power supply module. It is widely used in aviation, industrial, communications, medical, and other applications. The module design is based on iron-core pulse transformer isolation technology, which uses advanced synchronous rectification and ripple current control technology and provides low power dissipation and high efficiency.

The module has complete input and output protection functions, including voltage/current limiting, short circuit protection (SCP)/overload protection (OLP)/over voltage protection (OVP)/under voltage protection (UVP), and over temperature protection (OTP). The output voltage and current of the module can be adjusted by an external resistor. The input voltage range is 4~36V; the module can provide up to 12W output power, with efficiencies up to 96%. The operating temperature range is -40~+85°C.

The working principle of RPMD30-4812SEW/N involves a DC input into the buck/boost topology using capacitors and inductors. The inductors reduce the ripple current and store energy. The capacitors smooth out the voltage and reduce the amount of power from the supply. The internal booster regulator then charges the output capacitor with a duty cycle adjusted by soft-start circuit or remote voltage sense and programmed by the external resistor(s). The wire-wound inductor can be used to reduce the risk of high common mode noise or MF/LF interference.

The device employs a range of safety features such as UVP, OVP, SCP, OLP, and OTP. The UVP is activated when the input voltage is below a lower threshold. This ensures that the device is protected from input voltage transients. The OVP is activated when the output voltage exceeds the determined maximum range. This ensures that the device is protected from output voltage transients. The SCP is activated if the output current exceeds the determined maximum limit. This protects the device from shorts and other hazards. The OLP is activated if the power dissipated by the device exceeds the determined maximum limit. This prevents the device from getting too hot. Finally, the OTP is enabled if the temperature of the device exceeds a predetermined threshold. This protects the device from overheating.

In summary, RPMD30-4812SEW/N is a high-performance, low-cost, integrated DC-DC converter that is suitable for a wide range of applications. It offers high efficiency and low power dissipation, with input and output protection functions built-in. The module employs advanced synchronous rectification and ripple current control technology to improve overall performance.

The specific data is subject to PDF, and the above content is for reference