RPS104PJ330CS

Number of Pins:	8
Height - Seated (Max):	0.018" (0.45mm)
Size / Dimension:	0.079" L x 0.039" W (2.00mm x 1.00mm)
Supplier Device Package:	0804
Package / Case:	0804, Convex, Long Side Terminals
Mounting Type:	Surface Mount
Applications:	--
Operating Temperature:	-55°C ~ 155°C
Temperature Coefficient:	±200ppm/°C
Power Per Element:	62.5mW
Series:	RPS
Resistor-Ratio-Drift:	--
Resistor Matching Ratio:	--
Number of Resistors:	4
Tolerance:	±5%
Resistance (Ohms):	33
Circuit Type:	Isolated
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RPS104PJ330CS Application Field and Working PrincipleResistor Networks, Arrays form an essential part of a large number of electrical applications. The RPS104PJ330CS network is a high power, low voltage, radial array, consisting of four resistors connected in series and connected to a common center pin.This resistor array is a useful component for increasing current-handling capacity of a power supply or circuit. The network is most commonly used in applications where high current is necessary without the need for a large amount of voltage. Examples include motor control, radio and television receivers, industrial systems, and lighting systems.The RPS104PJ330CS network is based on N-type conduction material, which is a combination of an insulating dielectric and a conductive material. The network is made up of several sheet layers which are separated by a thin dielectric. When an external voltage is applied, a small current passes through the network, and when an alternating current is applied, the same current is circulated through the network.The network operates in analogy to the rule of three: the resistance of the whole network is equal to the sum of the resistances of its individual parts. The N-type resistor network has a maximum rating of 3000 mA and rated voltage of 6 V. Its rated max power dissipated by the resistors is 6.0 Watts.When compared to a traditional resistor, the RPS104PJ330CS network has several advantages: 1. It is highly reliable and can operate over a wide temperature range; 2. It is largely immune to electrical noise; 3. It dissipates less energy as heat; 4. It has high power capacity with low resistance; and 5. It has higher operating efficiency.The RPS104PJ330CS network can be used in numerous applications. It is commonly used as a voltage-divider for controlling voltage levels and also for current limiting. It can also be used in switched-mode power supplies, wireless transceivers, audio amplifiers, and high-voltage circuits.In terms of its application in voltage dividers, the RPS104PJ330CS network can be used to accurately divide the given input voltage into two output voltages, typically 6V and 3V. This is done by connecting one of the resistors in the network to the source voltage and the second one to the ground. The two output voltages are then provided by the remaining two resistors. The output voltage is distributed in the accurate ratio equal to the ratio of the resistances of the two respective resistors.In summary, the RPS104PJ330CS resistor network is a useful component that provides higher efficiency and higher current-handling capacity than a traditional resistor. It is a reliable device that is suitable for numerous applications. It is designed to operate over a wide temperature range, and is highly resistant to electrical noise. In particular, it can be used in switched-mode power supplies, voltage dividers, and numerous industrial and lighting systems.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description