RR02J36KTB

Through Hole Resistors are an important component in the circuits of electrical equipment. The RR02J36KTB is one of the most commonly used varieties. This resistor is designed to prevent too much current flow in the circuit, which can lead to further damage. In this article, we will discuss the application field and working principle of the RR02J36KTB.

Applications of RR02J36KTB

The RR02J36KTB is primarily used as a safety measure in electrical equipment. It can be found in power supplies, appliances, medical instruments and industrial machinery. Its resistance value can range from 0.1 ohm to 1K ohm, and its current handling capacity is 0.2 Amps. It is also used in timer circuits, and as a heater element. This resistor is designed to provide the highest reliability and highest safety standards.

Working Principle of RR02J36KTB

The RR02J36KTB is made up of metal wire wound around an insulating core. When a current is passed through the wire, a voltage is developed between one end of the wire and the other. This voltage is proportional to the level of current passing through the resistor. The resistor\'s resistance value will then determine the amount of current that is allowed to pass through it. This is known as Ohm\'s law.

The RR02J36KTB is designed to dissipate the excessive energy that is generated in the circuit due to the high currents. This energy is converted into heat, which is dissipated by the resistor in the form of heat energy. The resistor can also act as a protection device in case of an overload in the circuit. This is because it can limit the amount of current that flows through the circuit.

Conclusion

The RR02J36KTB is a commonly used resistor in the electrical industry. Its primary purpose is to provide protection against current overflow and protect the circuit from damage due to these large currents. It is used in a wide variety of applications due to its reliability and safety standards. Its working principle is based on Ohm\'s law, and its resistance value determines the amount of current that is allowed through the circuit.