RS0052K000FS73

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are ubiquitous in many electronic circuits. They are typically used to reduce the amount of current flowing through the circuit, as well as to act as a current limiter. For instance, an over-current protection circuit on a microcontroller will typically use a Through Hole Resistor to limit the current draw.The RS0052K000FS73 is a Through Hole Resistor is rated for 50KΩ (50,000 ohms) resistance. It has a power rating of 0.2W (200mW). These resistors can handle higher wattage components such as transistors, integrated circuits, and diodes as needed. They are commonly used in analog applications such as audio and video circuits, or as a voltage divider to adjust the voltage level for a circuit. They can also be used to provide current limiting in power supplies, which can help prevent accidental overload and damage to downstream components.The RS0052K000FS73 has a typical tolerance range of +10%/-10%. This means that the actual resistance of the resistor may be anywhere from 45KΩ to 55KΩ. This tolerance range allows for minor variances in resistor values due to manufacturing processes or other external factors.The RS0052K000FS73 has a compact form factor. The case length is only 4mm long, with a 2mm diameter, and a maximum lead length of 3mm. This small size makes it ideal for use in cramped circuitry, such as a PCB (Printed Circuit Board) or mobile device.The RS0052K000FS73 is a simple, yet reliable device. It is constructed from two non-magnetic stainless steel leads and a resistive element. The resistance value is determined by the diameter of the resistive element, which is typically made of a metal-oxide film or carbon-film material.The power dissipation of the RS0052K000FS73 is achieved through a combination of components: a substrate material, a resistive element, and a pair of leads. The substrate material is typically a ceramic, which acts as an insulating material. The resistive element is usually a sliding metal-oxide film which is adjustable to increase or decrease the resistance. The pair of leads is made of a non-magnetic stainless steel, allowing for a stable electrical connection to the substrate and resistive element.The RS0052K000FS73 is designed for use in a variety of different applications, including audio and video circuits, power supplies, current limiting, and voltage divider circuits. It is also a reliable choice for use in any resistance-based circuit design. The RS0052K000FS73 is a small, yet highly reliable Through Hole Resistor that can help ensure the proper functioning and safety of any electronics project.

The specific data is subject to PDF, and the above content is for reference