RS0101R500FS73

Series:	RS
Packaging:	Tape & Reel (TR)
Part Status:	Active
Resistance:	1.5 Ohms
Tolerance:	±1%
Power (Watts):	10W
Composition:	Wirewound
Features:	Moisture Resistant
Temperature Coefficient:	±50ppm/°C
Operating Temperature:	-65°C ~ 250°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.375" Dia x 1.780" L (9.53mm x 45.21mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors: RS0101R500FS73 Application Field and Working Principle

Through-hole resistors are common passive components used in electronics to regulate the flow of electricity. This regulation of electricity is done through voltage division, providing an adjustable voltage in a circuit. The resistor can also be used to reduce current flow, create voltage drops, and terminate transmission lines.The RS0101R500FS73 is a through-hole resistor with a resistance of 500 Ω. This model number can be found in a variety of components, including capacitors, inductors, and resistors, and is commonly used in circuits to achieve a precise resistance value. This component is typically through-hole and can fasten to a circuit board using screws or other mounting solutions. The model number is used to identify the device and other characteristics of the component, such as the size, resistance, and power handling capabilities.The working principle of a through-hole resistor is relatively simple. When an electrical current flows through the resistor, a proportional voltage is dropped across the resistor due to the resistance. This voltage drop is usually generated by the current passing through the resistor\'s material, such as metal or other semiconductor materials. The power dissipated in the resistor is then calculated using Ohm\'s law, which states that the power dissipated is equal to the voltage across the resistor multiplied by the current flowing through the resistor.The RS0101R500FS73 through-hole resistor is commonly used for various applications, such as in voltage regulation circuits, in which the maximum voltage delivered to the load is regulated by the resistor. The current passing through the resistor is also regulated by the resistor, preventing the circuit from being overloaded. This component can also be used to provide a high resistance, which is useful for preventing short circuits in a circuit. The resistor can also be used as a time lag resistor, slowing down the flow of current and controlling the voltage rise time.When selecting a through-hole resistor, it is important to make sure that the component meets the requirements of the application. The RS0101R500FS73 is available in a variety of power ratings, ranging from 0.5 watt to 5 watts. The resistor should also be rated for the maximum voltage in order to prevent the resistor from burning out due to the current flowing through it. Finally, the material of the resistor should be chosen carefully, as different materials will have slightly different resistances, resulting in the desired voltage drop.In conclusion, the RS0101R500FS73 through-hole resistor is a versatile passive component typically used in circuits to regulate the flow of electricity. Its working principle is relatively simple, allowing for a proportional voltage drop when a current passes through the resistor. This component can be used to regulate current, prevent short circuits, and to provide a time lag. When choosing a through-hole resistor, the power rating, voltage rating, and material should be taken into account in order to select the best component for the application.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description