Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors

The RSS3W1K8JTB is a through hole resistor, commonly used for a wide range of electrical and electronic applications. It features a unique wide body design, which utilizes three parallel leads for power supply and control. The wide body design allows for higher electrical output under normal electrical load conditions.

Application Field

The RSS3W1K8JTB through hole resistor has a wide range of application fields, including power control, industrial and consumer products, automotive and agricultural motors, broadcast equipment, computer and communications systems, wire and cable transmission, and other electronics products. Its adaptability to a variety of conditions makes it a valuable component for any electronic system.

Working Principle

A through hole resistor works by allowing a specific amount of current to flow through the resistor, which causes resistance due to the material properties of the resistor. The resistor is connected in series with other electronic components to provide control or protection of a system. The current is varied depending on the type and size of the resistor, as well as the resistance value. The resistance value is typically labeled on the resistor and should be checked before installation.

The resistance value of the RSS3W1K8JTB through hole resistor is 1 kHz, which means it can handle up to 1,000 Hz of current. The current can be increased up to 20 percent before the resistor fails. This type of resistor is usually mounted with a lead spacing of 1/2-inch. The lead diameter is 0.5 to 0.625 inches.

The three leads of the RSS3W1K8JTB through hole resistor are used for power supply and control. The outer two leads are connected to the power source, while the middle one is connected to the electronic control device. When the control device is switched on, the current flowing through the resistor is determined by the resistance value. This current activates the electronic control device, which in turn activates the system.

Advantages

The main advantage of the RSS3W1K8JTB through hole resistor is its wide body design, which offers higher electrical output compared to other types of resistors. It also has a higher current capacity than most other resistors, making it suitable for high-current transmission applications. Additionally, it is designed for easy installation, with the three leads being relatively easy to position.

Disadvantages

The RSS3W1K8JTB through hole resistor does have some disadvantages. For one, it is relatively large, which makes it difficult to fit in some applications. Additionally, its wide body design increases its power output, but this also contributes to a higher power consumption compared to other types of resistors. Finally, its price is somewhat on the higher side compared to other resistors.

Conclusion

The RSS3W1K8JTB through hole resistor is a versatile component, thanks to its wide range of applications. Its wide body design allows for higher power output and current capacity than other resistors, making it useful for power control systems. Although it is relatively large and power-consuming, its wider lead spacing and easier installation make it a strong contender for any electronic system.

The specific data is subject to PDF, and the above content is for reference