RTO050FR2000JTE1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors

Through hole resistors are a form of electrical resistor used when dealing with higher powered electrical and signal connections. The main component of a through hole resistor is a metal strip of resistive material, whose conduction resistance is proportional to its geometrical size and physical properties of the material. The resistance is usually measured in Ohms, under nominal temperatures and material constants.

The RTO050FR2000JTE1 is a through hole resistor designed for use in high-power electrical applications, such as portable computers, telecommunications, consumer and industrial electronics, etc. It provides a very stable resistance to high frequency and temperature changes. Its main characteristic is its low resistance values, in addition to its ease of mounting to a PCB board.

The RTO050FR2000JTE1 is constructed using metal alloy foil with two grades of insulation. This type of resistor has excellent current carrying capacity, as well as a very low temperature coefficient of resistance. It is also designed with a wide range of resistance values, which makes it suitable for a wide variety of applications.

The RTO050FR2000JTE1 can be used in a number of different applications as a current-limiting resistor, voltage-divider resistor, RC network resistor, and as a damping resistor. In a current-limiting resistor application, the resistor is used to limit the current flowing through a circuit. It is especially useful in protection circuits where it can protect the circuit components from damage due to an excessive current.

The RTO050FR2000JTE1 can also be used as a voltage-divider resistor. In this application, it is used to divide a higher voltage into two lower voltages. This can be used in circuits where the supply voltage needs to be divided into several different voltage outputs for different components.

The RTO050FR2000JTE1 can also be used as an RC network resistor. This type of resistor is a combination of two or more resistors in series or parallel, which is used to create an RC (resistor-capacitor) network. This network can be used to create a controlled signal path and filter the high frequency components of a signal.

Lastly, the RTO050FR2000JTE1 can also be used as a damping resistor. In this application, it is used to reduce or dissipate high-frequency oscillations in a circuit, such as oscillations caused by diodes or transistors. This can be very useful in protection circuits, as it helps to reduce any potential damage caused by the oscillations.

Overall, the RTO050FR2000JTE1 through hole resistor is a great choice for producing a very stable resistance in high-power applications. It provides an excellent current carrying capacity and a low temperature coefficient of resistance. It is also designed with a wide range of resistance values, which makes it suitable for a wide variety of applications.

The specific data is subject to PDF, and the above content is for reference