Allicdata Part #: | RUS4R0-ND |
Manufacturer Part#: |
RUS4R0 |
Price: | $ 0.69 |
Product Category: | Potentiometers, Variable Resistors |
Manufacturer: | Ohmite |
Short Description: | POT 4 OHM 1000W WIREWOUND LINEAR |
More Detail: | 4 Ohm 1 Gang Linear Panel Mount Potentiometer None... |
DataSheet: | RUS4R0 Datasheet/PDF |
Quantity: | 1000 |
Moisture Sensitivity Level (MSL): | 1 (Unlimited) |
Lead Free Status / RoHS Status: | Contains lead / RoHS non-compliant |
1 +: | $ 0.63000 |
Temperature Coefficient: | -- |
Mounting Type: | Panel Mount |
Bushing Thread: | -- |
Actuator Diameter: | 0.375" (9.53mm) |
Actuator Length: | 2.000" (50.80mm) |
Actuator Type: | Flatted |
Termination Style: | Solder Lug |
Resistive Material: | Wirewound |
Adjustment Type: | User Defined |
Rotation: | 335° |
Number of Turns: | 1 |
Series: | U |
Power (Watts): | 1000W |
Built in Switch: | None |
Number of Gangs: | 1 |
Tolerance: | ±10% |
Resistance (Ohms): | 4 |
Taper: | Linear |
Moisture Sensitivity Level (MSL): | -- |
Part Status: | Active |
Lead Free Status / RoHS Status: | -- |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The RUS4R0 application field and working principle is a category within Rotary Potentiometers and Rheostats. RUS4R0 is an adaptation of rheostat technology and is primarily used as a switch and complete process controller. Its operating principle is straightforward, but unlike many other instruments, various parameters must be considered in order to achieve accurate control.
The core of the RUS4R0 system is a stack of disks, with contacts on the outer edge of each disk. Each disk carries a part of the load and all except the uppermost disk acts as a "zero reference" or "ground" reference. The rate at which each disk rotates determines the amount of resistance or impedance applied to the circuit. By changing the speed of each disk, the total resistance, power factor, and other parameters can be adjusted.
The number of disks used in a RUS4R0 system will depend on the desired precision and accuracy. Commonly, these systems use between three and five disks; however, custom designs may require more or less depending on the application. Each disk is set to operate at a fixed rate, and maintaining the accuracy of this rate is crucial in order to reduce errors.
In order to maintain the rotation rate of each disk, a roller bearing system is typically used. This is typically achieved by having a metal rod running through the center of the stack of disks, and a ball bearing running along the outside surface of the rod. As the disks turn, the ball bearings move along the rod, causing the power to be evenly distributed throughout the entire stack of disks. This ensures that all disks maintain the same speed and allows for consistent power input.
A typical RUS4R0 system consists of three primary components: the switch module, the control module, and the power supply module. The switch module is responsible for controlling the resistance level for each disk, while the control module is responsible for providing power to the disks and maintains the rotation speed. Finally, the power supply provides a low-voltage current to the entire system.
When used as a switch, the RUS4R0 system requires only two input signals: a pulse voltage and ground. The pulse voltage is used to indicate the desired position of the switch, while the ground is used to indicate the "off" position. By providing the pulse voltage, the switch module can adjust the resistance and power factor for each disk, resulting in precision control over the desired output. For process control applications, the input signals can also be used to control the timing and speed of the disks.
In summary, the RUS4R0 system is an adapted form of rheostat technology which offers precise control and flexible designs. By using a rollerbearing system, the speed of each disk can be maintained, resulting in accurate power input and control. In addition, the system can be used as a switch or as a process controller, depending on the application. The system is an ideal solution for those looking for reliable and accurate control.
The specific data is subject to PDF, and the above content is for reference
POT 10 OHM 500W WIREWOUND LINEAR10 Ohm 1...
POT 15 OHM 100W WIREWOUND LINEAR15 Ohm 1...
POT 5K OHM 1W LINEAR5k Ohm 1 Gang Linear...
POT 50K OHM 2W CERMET LINEAR50k Ohm 1 Ga...
POT 10K OHM 1/2W PLASTIC LINEAR10k Ohm 1...
POT 2K OHM 2W WIREWOUND LINEAR2k Ohm 1 G...