RV221K10T Circuit Protection

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TVS (Transient Voltage Surge Suppressor Diodes) or varistors and MOVs (Metallo-Oxide Varistors) are useful components used for general transient suppression, electromechanical protection, and overvoltage protection. The RV221K10T is a sample application based on these technologies.

Varistors are also known as voltage-dependent resistors, because their resistance varies with the applied voltage. They are a type of non-linear two-terminal solid-state electrical device that acts like a variable resistor. Varistors are used to protect electronic circuits from voltage spikes or transients generated by static electricity or voltage surges caused by other devices. The devices are essentially two electrical plates sealed in a ceramic material, a metal oxide such as zinc oxide, that has a non-linear conductivity. Thus, when the applied voltage reaches its peak value, the resistance decreases, allowing it to absorb any unwanted voltage transients.

MOVs, on the other hand, are metallic oxide varistors with voltage-sensitive resistance in the range of 1 to 330 volts. They are used mainly for overvoltage protection and electrostatic discharge (ESD) protection in electronic circuits. MOVs are designed to limit voltage surges in a circuit by providing a short circuit path for the sudden high voltage. The RV221K10T, in particular, is a radial leaded MOV with a voltage rating of 220V AC and a 10mm disc size. Its voltage protection function eliminates high-voltage transients caused by lightning, power outages, or voltage overloads.

When the MOV is connected to a power control circuit, the device will act as a controlled resistor and absorb any unwanted electrical transients. When in a circuit, the voltage trigger level is exceeded, the MOV will automatically reduce its resistance and quickly absorb any overvoltage or surges, and dissipate the energy to ground. After the surge ends, the device will automatically reset itself to its original state, thus protecting the power components and other circuit elements.

The RV221K10T can be used for a variety of applications including consumer electronics, appliances, power tools, lighting systems, and transformers. This device has different uses including temperature compensation, noise filtering, surge protection, and overvoltage protection. It can also be used as part of an overall power distribution system. The device provides uniform absorption of transients so that any overvoltage can be easily handled by the movable parts in the power distribution circuit.

The RV221K10T also provides protection against ESD events which can cause circuit failure. If an ESD event occurs, the device will absorb the energy and cause the applied voltage to decrease. This ensures that surges or overvoltages do not cause any damage to the electronic components.

In conclusion, the RV221K10T is an effective application for transient suppression, electromechanical protection, and overvoltage protection. It has a low leakage current which ensures the protection of sensitive components and offers a controlled resistance to ensure fast and uniform absorption of transients. This device has the capability to protect circuits against ESDs and other voltage spikes or transients, thus ensuring the reliability of the system.

The specific data is subject to PDF, and the above content is for reference