RV241K10T Circuit Protection

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Transient voltage suppressors (TVSs) are components that suppress voltage transients caused by electromagnetic interference (EMI). Among these, varistors, also known as metal-oxide varistors (MOVs), are particularly suitable for protection from high-voltage transient surge. The RV241K10T is one type of these varistors and its application fields and working principle are as follows.

RV241K10T Application Fields

The RV241K10T belongs to non-isolated transient voltage suppressors (TVSs). It is used in two common application fields, such as power supplies and data port protection, to protect sensitive devices like computers from voltage surges. According to datasheet, it is suitable for protecting audio equipment and various consumer electronic devices.

Specifically, the RV241K10T is designed to provide power-supply rail protection against transients from up to 10kV high-voltage surges. It also offers protection from electrostatic discharge (ESD) for data and signal ports of various on-board and portable consumer electronics. For instance, it can protect embedded controllers, semiconductor components, and cable sets, including USB, IEEE1394, DVI, HDMI, and DisplayPort.

Working Principle

The RV241K10T works by redirecting excess voltage away from the protected circuitry, much like a fuse would trip, but resetting itself after the voltage spike has subsided. This prevents the unprotected circuitry from being exposed to potentially damaging voltages. It does this by using a combination of metal-oxide varistor elements and zener diodes. The metal-oxide varistors contain a ceramic disk that consists of a zinc-oxide-based pressing, which is surrounded by two end caps and a metal layer used as a contact.

When a voltage reaches or exceeds the varistor\'s rated voltage, electricity will flow through the ceramic disk and metal layer. In turn, the voltage applied to a circuit decreases, diverting the resulting current away from the sensitive devices. The varistor\'s entire operation can be summarized as: when an RC voltage of a certain magnitude is applied to a varistor, excess current will normally flow through it, thus decreasing total voltage applied to the circuit.

Conclusion

In summary, the RV241K10T is a type of metal-oxide varistor, used in most demanding applications requiring protection from transient voltages up to 10kV. It is designed to provide protection from high-voltage transient surge and electrostatic discharge. The working principle of the RV241K10T is based on diverting excess current away from the protected circuitry, using a combination of metal-oxide and zener diodes.

The specific data is subject to PDF, and the above content is for reference