RWM06221500JA15E1 Resistors

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors

The RWM06221500JA15E1 is an example of a fixed-value through-hole resistor. Through hole resistors are resistors built with wire or resistive film elements, and are designed to be inserted through punched or drilled holes in a circuit board. This type of package is popular in circuit boards and provides advantages in cost and performance.

These resistors are typically designed around a "discrete component" type resistance value, generally defined by a 3 or 4 digit code (RWN06221500JA15E1) referencing the resistance value in Ohms. A wide variety of through-hole resistor types are available and all include a critical element: the resistive film element. This is made from a conductive material, such as tantalum or zinc, and is made very thin to allow the resistor to take up a smaller amount of space within the circuit board. The thin resistive film element is then printed on a circuit board route and connected to wire leads.

The resistors vary in the values of resistance they offer and will be usually designed in general form as a "fixed value." For example, the RWM06221500JA15E1 is 1.5k Ohm with 5% tolerance level. The resistors also come in different physical shapes, sizes, and functionality. Some of the more common types include, metal film resistors, thick and thin film resistors, carbon composition, wire-wound, and variable. Depending on the type of application, resistors are used in different ways.

For example, a through-hole resistor can be used in a variety of applications. One common use for through-hole resistors it to act as a current limiter, to reduce the amount of current going to an electronic device. Another popular application for through-hole resistors is to provide power for electric motors, circuits, and other electronic devices, and to help regulate the current and voltage in a circuit. They are also used in digital circuits, to provide protection to other components from transient currents.

The working principle of through-hole resistors is based on Ohm\'s Law, which states that the current in a circuit is proportional to the applied voltage divided by the resistance. The resistance of a through hole resistor is due to the resistance of the resistive film element, which is a thin layer of metal or other conductive material that is printed onto the route. As current passes through the resistor, a voltage drop is produced due to the resistance of the element. This voltage drop across the resistor is known as the power dissipation, which is the amount of energy consumed by the resistor.

Through-hole resistors are a widely used component in circuits and play a very important role in helping to achieve many design objectives. They are reliable, cost-effective, and offer a wide range of resistive values, making them a popular choice for many applications.

The specific data is subject to PDF, and the above content is for reference