RWR71S1002FRRSL

Series:	Military, MIL-PRF-39007, RWR71S
Packaging:	Tape & Reel (TR)
Part Status:	Active
Resistance:	10 kOhms
Tolerance:	±1%
Power (Watts):	2W
Composition:	Wirewound
Features:	Military, Moisture Resistant
Temperature Coefficient:	±20ppm/°C
Operating Temperature:	-55°C ~ 250°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.187" Dia x 0.812" L (4.75mm x 20.62mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	R (0.01%)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors

Through Hole Resistors are electrical components that are used to restrict the flow of electric current. They commonly come in the form of a cylinder or disk that has two metal contacts protruding from the sides. The resistance value is usually indicated by a series of colored rings or numbers printed near the metal contacts.The RWR71S1002FRRSL is one such resistor. It is a radial-lead resistor, meaning that the metallic prongs protruding from the sides of the cylinder are both curved slightly outwards. This helps to ensure a secure fit in the hole drilled where the resistor needs to be installed. The RWR71S1002FRRSL has a resistance value of 1002 ohms, and it is also rated for a maximum power rating of 1/2 Watt.The application field of the RWR71S1002FRRSL is quite wide, as it can be used in a variety of electronics devices or circuits. It is often used to protect sensitive components from high currents, or to create specific voltage drops across a circuit. It can also be used to regulate the current between two points in a circuit. Other applications include limiting the current drawn from a power source, providing current limiting protection, and biasing particular transistors and ICs.As for its working principle, the RWR71S1002FRRSL operates in the same way as any other resistor. The resistor has a specific resistance value, and when electric current is applied through it, a percentage of the voltage will be dropped across it. This can be expressed as Ohm’s law, which states that the voltage drop across the resistor is proportional to the current flowing through it. Thus, by adjusting the current, you can control the voltage drop that occurs across it.Therefore, when using the RWR71S1002FRRSL, the user can adjust the current (by adjusting the potentiometer or other controlling device) in order to achieve a desired output voltage. This makes the RWR71S1002FRRSL a very valuable piece of equipment that can be used in many different applications.In addition to its use as a voltage regulator, the RWR71S1002FRRSL can also be used in signal conditioning circuits. This means that the resistor can be used to filter out unwanted signals, or to dampen a signal that has too much energy. This can be important when transmitting signals through a wire, or when dealing with large amounts of interference or noise.Overall, the RWR71S1002FRRSL is a resistor that is powerful enough to handle many of the complex tasks required for signal conditioning and voltage regulation, while remaining small enough to be used in a variety of through-hole components and devices. Its versatile design and wide array of applications make it one of the most important components used in today’s electronics.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description