RWR71S47R5FSS70

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through hole resistors encompass a variety of resistors that are designed and manufactured to be soldered into circuit boards. These resistors are used in a wide range of electronic devices. The RWR71S47R5FSS70 is a through hole resistor designed for wider temperature range and high power applications such as in electrical motor controls. It features a low resistance (10 Ohm) and offers a wide power range, from 0.5W to 7W.

This type of resistor is constructed from two layers of conductive materials called resistor elements. Layer one is usually constructed from a flat metal or ceramic sheet and layer two is a glass cermet element. The resistor elements are connected to each other with a layer of insulating epoxy material. They are then mounted onto a circuit board using through hole technology.

The working principle of a through hole resistor is the same as any other resistor; it works by limiting the flow of electricity. When a voltage is applied across the two resistor elements, a current is generated through the resistor. This current is proportional to the voltage across the resistor, creating a path of least resistance for the current to flow through, resulting in a decreased voltage. This is known as resistance, and can be measured using Ohm\'s law.

There are several advantages of through hole resistors. First, they can be used in multiple applications, from automotive to medical. They are also able to tolerate higher power and temperature ranges than thin film resistors. Additionally, through hole resistors are suitable for high frequency applications such as in radio frequency circuits and communications systems. Moreover, they are more widely accepted and have higher cost efficiency than surface mount resistors.

RWR71S47R5FSS70 is a through hole resistor designed for higher temperature and power applications. It has a low resistance (10 Ohm) and offers a wide power range, from 0.5W to 7W. The resistor is manufactured from two layers of flat metal or ceramic sheet and glass cermet elements. These resistors offer good thermal stability, high reliability and are suitable for high frequency applications.

Overall, through hole resistors are widely used in the electronics industry due to their ability to tolerate higher power and temperature ranges, as well as their cost efficiency. The RWR71S47R5FSS70 is a through hole resistor designed specifically for high temperature and power applications, and offers benefits such as good thermal stability and high reliability. Therefore, they can be used in a variety of applications, from automotive to medical.

The specific data is subject to PDF, and the above content is for reference