RWR71S6R49FRRSL

Series:	Military, MIL-PRF-39007, RWR71S
Packaging:	Tape & Reel (TR)
Part Status:	Active
Resistance:	6.49 Ohms
Tolerance:	±1%
Power (Watts):	2W
Composition:	Wirewound
Features:	Military, Moisture Resistant
Temperature Coefficient:	±50ppm/°C
Operating Temperature:	-55°C ~ 250°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.187" Dia x 0.812" L (4.75mm x 20.62mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	R (0.01%)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

.Introduction to Through Hole ResistorsThrough hole resistors, also known as axial resistors, are the most common type of resistors in electronic circuits. These resistors are typically composed of a cylindrical ceramic tube, with two insulated wire leads emerging from each end of the ceramic tube, and sometimes a metal cap to protect and insulate the resistor. Through hole resistors are used to control the current flow within a circuit to ensure that devices in the circuit are working as intended.RWR71S6R49FRRSL Application Field and Working PrincipleThe RWR71S6R49FRRSL through hole resistor is an extremely low-power resistor, so it is often used in applications where the current flow must be limited. This type of resistor is commonly used in circuit design for controlling current levels, limiting sparks in control circuits, and providing protection to light-emitting diodes (LEDs). The resistor also features a small footprint, which allows it to be used in more compact and crowded circuits.The working principle of the RWR71S6R49FRRSL through hole resistor is based on Ohm’s Law, which states that the current passing through a resistor is directly proportional to the voltage applied to it. In other words, the current is inversely proportional to the resistance. This means that by altering the resistance, you can also alter the current passing through the circuit. By using the RWR71S6R49FRRSL through hole resistor, you can reduce the current level to prevent overstressing or damage to other components in the circuit.When using the RWR71S6R49FRRSL through hole resistor, it is important to note that the resistor will heat up due to the current running through it. This heat needs to be dissipated or the resistor could be damaged, so it is important to ensure proper heat transfer to keep the resistor within the required voltage and current levels.ConclusionThe RWR71S6R49FRRSL through hole resistor is a great choice for applications requiring low-power control. The resistor is able to reduce the current passing through a circuit, which can help to protect the other components in the circuit from damage. The resistor also features a small footprint, making it possible to use in more compact and crowded circuits. It is important to ensure that the resistor is kept within the required voltage and current levels, as the resistor will heat up due to the current running through it.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description