RWR71S90R9FRRSL

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are a type of resistors that are used in electronic assemblies. The RWR71S90R9FRRSL Through Hole Resistor is a non-polarized resistor that is designed to be used in many different types of applications including home and industrial electronics. This type of resistor has a very wide range of working and resistance values, allowing for a wide range of applications. It is also a very reliable and versatile device that can meet the needs of any given application.

The RWR71S90R9FRRSL Through Hole Resistor is composed of an insulated metal film which is coated in a resistive material. The metal film acts as the resistance element of the resistor, controlling the amount of current that can flow through the resistor. The resistive material is used to protect the metal film from environmental conditions such as moisture and heat. This type of resistor is usually supplied in packages that contain three wires. The wires are then connected to the metal film and then connected to the circuit board in order to form the resistor.

The resistor is designed to provide a range of resistance values between 10 ohms and 1000 ohms. The resistance value of any given resistor is determined by the size of the unit, the type of film coating used, and the type of resistive material used. All of these factors must be taken into consideration before selecting the best resistor for a given application. The RWR71S90R9FRRSL Through Hole Resistor is available in a variety of sizes to accommodate different applications. The selection of the correct size is essential in order to ensure that the resistance is not too low or too high for the particular application.

The resistor is also designed to be a high-power, high-frequency device, meaning that it can handle higher amounts of current than other types of resistors. This makes the RWR71S90R9FRRSL Through Hole Resistor ideal for power systems and circuits that require a high-power environment. Additionally, the device can also be used in applications that require a high-power environment, but where a high-frequency component is not as important. This type of resistor is designed to withstand temperatures up to 150°C, making it suitable for many applications.

The RWR71S90R9FRRSL Through Hole Resistor is designed to perform in a wide variety of applications. Its working principle involves its resistance per unit of length. The device is capable of providing a lower resistance per unit of length than most other types of resistors, making it ideal for applications that require a lower resistance per unit of length. Additionally, because the device is composed of an insulated metal film, it is able to provide a very high resistance per unit of length as well. This is beneficial when the application requires a high voltage or power component.

Additionally, because the device is non-polarized, it can be connected to either positive or negative polarity. This is important in applications where the resistance must remain constant and cannot be changed. The device can also be used in circuits where the resistance needs to be changed on a continuous basis, such as in digital circuits or switching devices.

In conclusion, the RWR71S90R9FRRSL Through Hole Resistor is a reliable device that is designed to perform in a variety of applications. It is composed of an insulated metal film which is coated in a resistive material, providing the device with a wide range of working and resistance values. Its non-polarized design makes it suitable for a variety of applications, and its ability to withstand high temperatures make it suitable for many applications. This type of resistor is therefore a highly reliable, versatile, and dependable device that can meet the needs of any given application.

The specific data is subject to PDF, and the above content is for reference