RWR74S82R5FSS73

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are components that are commonly used in electrical and electronic circuits, primarily for resistance purposes. They are used to reduce current flows, divide voltage, limit current, and terminate signals. They are made of different materials, such as metal, carbon, or ceramic, with a variety of resistances. The RWR74S82R5FSS73 is a through hole resistor with a resistance of 7.4 ohms, a tolerance of ±2%, and a dissipation power of 82mW. It is a general-purpose resistor that is available from a wide variety of manufacturers.

The RWR74S82R5FSS73 is designed to have low inductive and temperature coefficients. The operating temperature range of the device is from -55 to +125 degrees Celsius. It is also designed to have a small thermal resistance. Its construction is designed to give it extra stability against self-heating and resist the effects of noise in electronic circuits. In addition, the device is capable of withstand soldering heat.

The RWR74S82R5FSS73 has a wide range of applications in both digital and analog electronic circuits. It can be used to limit current in circuits, scale the impedance of a circuit, bias transistors, and provide negative feedback in an op-amp circuit. It can also be used as a voltage-controlled voltage source or voltage divider in an electronic system, where its resistance can be adjusted manually or electronically. In addition, it is also used in automotive electronics, noise-cancellation systems, and communications equipment.

The working principle of the RWR74S82R5FSS73 is based on Ohm\'s Law, which defines the relationship between the voltage applied across a resistor and the resulting current. According to Ohm\'s Law, when a voltage is applied across a resistor, the current that flows through it is equal to the voltage divided by the resistance of the resistor. The current flowing through the RWR74S82R5FSS73 is limited by its resistance, which is fixed at 7.4 ohms. Thus, by applying different voltages across the device, different currents can be achieved through it.

In conclusion, the RWR74S82R5FSS73 is a through hole resistor that has a resistance of 7.4 ohms, a tolerance of ±2%, and a dissipation power of 82mW. It has a wide range of applications in both digital and analog electronic circuits, from limiting current to providing negative feedback in op-amp circuits. Its working principle is based on Ohm\'s Law, and its current is limited by its resistance.

The specific data is subject to PDF, and the above content is for reference