RXD-315-KH RF/IF and RFID

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The RXD-315-KH RF receiver is a type of analog receiver capable of handling broadcast frequencies at 315 MHz, making it suitable for applications such as security systems, radio remotes, and other similar uses. The receiver has a built-in 30 kHz bandpass filter that eliminates undesired frequencies, providing a clean signal to further processing. It also has a tolerance of up to 47dBm of RF signals, making it suitable for long-distance reception.

The primary purpose of an RF receiver is to convert the signals received at its antenna into a form that can be understood by the application. In this case, the RXD-315-KH receiver output is in analog form, allowing direct connection to digital or analog circuits. The signal is then filtered through its built-in bandpass filter, further enhancing the signal quality, before being sent for further processing.

The standard method of connection for an RF receiver is referred to as an unbalanced connection, wherein one of the antenna\'s wires is connected directly to the receiver\'s ground pin, while the other is connected to the input pin. This type of connection is most commonly used in receivers operating at low frequencies, such as 315MHz or lower. The advantage of this type of connection is that it reduces any potential noise, as well as the resistance of any circuit connected in parallel to the transmitter.

The operating circuit of an RXD-315-KH RF receiver is fairly simple. A PNP transistor is used to amplify the signal from the antenna, before it is sent to the second stage. In the second stage, a negative feedback circuit is employed to reduce the gain of the signal, thereby controlling the modulation of the signal. This stage then acts as a resistive amplifier, increasing the current output of the signal. Additionally, a mixer is also used to reduce the noise coming from the antenna before it reaches the amplifier.

The signal from the amplifier is then sent to a band pass filter, which is tuned to eliminate any unwanted frequencies. Finally, the signal is sent to the output stage, which converts the amplified analog signal into a digital signal suitable for further processing. The RXD-315-KH also has an optional mute switch, allowing a low-level output, or the ability to prevent the signal from being sent downstream altogether.

The RXD-315-KH receiver can be used in a number of applications, such as remote controller operations, short-range wireless sensors, low-power radio systems, and more. The receiver\'s superior signal-to-noise ratio allows it to be used in applications with longer distances, making it well-suited for surveillance and other applications that require long-distance reception. Additionally, its relatively high tolerance of RF signals makes it suitable for use in outdoor environments, where interference from other equipment can occur.

The RXD-315-KH is an RF receiver, specifically designed to handle broadcast frequencies up to 315 MHz. Its built-in 30 kHz bandpass filter eliminates undesired frequencies, and its tolerance of up to 47dBm of RF signals allows it to be used in long-distance applications. The receiver can be connected through a standard unbalanced connection, and the operating circuit is simple enough to allow for straightforward operation. The RXD-315-KH is suitable for a number of applications, such as remote controller operations, short-range wireless sensors, low-power radio systems, and more.

The specific data is subject to PDF, and the above content is for reference