Allicdata Part #: | RXM-418-KH3-ND |
Manufacturer Part#: |
RXM-418-KH3 |
Price: | $ 10.00 |
Product Category: | RF/IF and RFID |
Manufacturer: | Linx Technologies Inc. |
Short Description: | RECEIVER 418MHZ KH3 SERIES |
More Detail: | KH3 RF Receiver ASK, OOK 418MHz -112dBm Castellat... |
DataSheet: | RXM-418-KH3 Datasheet/PDF |
Quantity: | 989 |
1 +: | $ 9.09090 |
25 +: | $ 8.40420 |
100 +: | $ 7.20468 |
Current - Receiving: | 5.2mA |
Supplier Device Package: | Module |
Package / Case: | 31-SMD Module |
Operating Temperature: | -40°C ~ 70°C |
Voltage - Supply: | 2.1 V ~ 3.6 V |
Features: | Integrated Remote Control Decoder |
Antenna Connector: | Castellation |
Memory Size: | -- |
Data Interface: | Parallel |
Series: | KH3 |
Applications: | Home/Industrial Automation, Lighting, Remote Control, RKE |
Modulation or Protocol: | ASK, OOK |
Data Rate (Max): | -- |
Sensitivity: | -112dBm |
Frequency: | 418MHz |
Part Status: | Active |
Packaging: | Tube |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The RXM-418-KH3 RF Receiver is designed for applications such as wireless data transfer, remote control, and near-field communications. It’s a highly efficient, low-cost, lightweight solution that can be used with a variety of third-party modules, transceiver, and receivers.
The RXM-418-KH3 uses advanced digital signal processing (DSP) techniques to ensure reliable communication in a range of conditions. It features a high-speed data stream with an 85% gain reduction over conventional receivers. The receiver can process data packets up to 180 Kbps and has a maximum range of approximately 300 meters.
The RXM-418-KH3 is based on the RS-232 protocol, which is a low-cost, simple, and reliable solution for data communication and remote control. It is compatible with all UART-based serial interfaces and has an input range of up to 20 volts DC. It also supports a variety of protocols, such as Bluetooth and ZigBee, and has a maximum range of 120 meters.
The RXM-418-KH3 works by receiving a signal from a transmitter and converting it into a digital signal for further processing. The antenna is the main element that receives the signal, which is then transmitted to the receiver circuitry. The receiver circuitry amplifies the signal and then sends the information to the CPU. The processor then processes the signal and transmits the data to the output device.
The receiver is designed to operate in a variety of operating conditions, such as temperature and humidity levels. It is waterproof and dustproof, allowing for reliable operation in harsh environments. It also features overload protection for certain frequencies, ensuring that any interference does not affect the operation of the receiver.
The RXM-418-KH3 is a powerful and efficient solution for applications that require wireless data transfer and near-field communications. It is reliable, cost-effective, and easy to use. With its advanced digital signal processing and receiver circuitry, it provides fast and reliable communication performance. It has a wide operating range, making it an ideal choice for a variety of applications.
The specific data is subject to PDF, and the above content is for reference
Multi-band GNSS receiver with nanosecond...
High-performance LEA-6 series GPS module...
Simultaneous reception of GPS / QZSS, GL...
LEA-M8S module can receive up to 3 GNSS....
High-performance u-blox 6's LEA-6 se...
High-performance u-blox 5 LEA 5 series G...