S-1000N40-I4T1G

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

PMIC (Power Management Integrated Circuit) is a type of integrated circuit that is used to manage power and protect the resources. It is an important component in any electronic system, due to its ability to maintain control over the power required for a specific device. The S-1000N40-I4T1G is an example of such a PMIC and its application field and working principle are discussed in this article.

S-1000N40-I4T1G Application Field

The S-1000N40-I4T1G is typically used in mobile applications. The device provides system reset and power good detection, and is capable of supplying up to 3.3V power. It features a 4-Channel N-Channel MOFSET (power switch) to further enhance power control. This PMIC also offers a low-voltage lockout to prevent operation at a voltage below a specified level. Its on-chip sequence generator is ideal for applications requiring low power-on sequencing, including battery powered systems.

In addition to mobile applications, the S-1000N40-I4T1G is also used in industrial applications due to its ability to provide precision monitoring and control of voltage, current and temperature. The device provides an integrated threshold detector to detect over-voltage, under-voltage, over-current and over-temperature conditions, and can be used to trigger a reset or an interrupt when a fault occurs. Its protection features make it an ideal choice for use in industrial applications, where a sudden power loss can cause major damage.

S-1000N40-I4T1G Working Principle

The S-1000N40-I4T1G works on a basic principle of generating a proportional control loop in order to maintain its output voltage. The device has two inputs, one for the output voltage and one for the specific output current. These inputs are compared with the reference voltage, and the resulting error signal is used to adjust the output voltage accordingly.

At the core of the S-1000N40-I4T1G is the N-channel power switch. This power switch is used to control the output voltage according to the error signal. It is triggered by the current sense amplifier, which measures the load current and supplies it to the power switch. If the load current exceeds the specified limit, the switch will shut off, thus protecting the device from overcurrent. Similarly, if the voltage level is higher than the specified limit, the switch will open, protecting the device from overvoltage.

In addition to its basic operation, the S-1000N40-I4T1G also provides additional features such as on-chip sequence generator, power good, and prebtn functions. The sequence generator allows the device to power on in a specific order to ensure a safe startup process. The power good function measures output voltage and informs the system if an output status is wrong. And the prebtn function allows the user to set the reset delay curve in order to adjust the system behavior depending on the operating environment.

Conclusion

The S-1000N40-I4T1G is an advanced PMIC that can be used in both mobile and industrial applications. It provides precise power control, protection, and sequencing features that make it an ideal choice for devices that require reliable and precise power management. Its on-chip features make installation and use easy, while also providing enhanced reliability.

The specific data is subject to PDF, and the above content is for reference