Allicdata Part #: | S-1000N42-I4T1U-ND |
Manufacturer Part#: |
S-1000N42-I4T1U |
Price: | $ 0.19 |
Product Category: | Integrated Circuits (ICs) |
Manufacturer: | ABLIC U.S.A. Inc. |
Short Description: | IC VOLT DETECT N-CH 42V SNT-4A |
More Detail: | Supervisor Open Drain or Open Collector 1 Channel ... |
DataSheet: | S-1000N42-I4T1U Datasheet/PDF |
Quantity: | 1000 |
5000 +: | $ 0.17010 |
Series: | S-1000 |
Packaging: | Tape & Reel (TR) |
Part Status: | Active |
Type: | Voltage Detector |
Number of Voltages Monitored: | 1 |
Output: | Open Drain or Open Collector |
Reset: | Active Low |
Reset Timeout: | -- |
Voltage - Threshold: | 4.2V |
Operating Temperature: | -40°C ~ 85°C (TA) |
Mounting Type: | Surface Mount |
Package / Case: | 4-SMD, Flat Leads |
Supplier Device Package: | SNT-4A |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Integrated circuit supervisory circuits are designed to monitor power systems for failure and provide protection for connected equipment and systems. The S-1000N42-I4T1U, for instance, is a device specifically designed to prevent overvoltage and undervoltage conditions, as well as latch-up in low-voltage applications. This circuit is essentially a combination of several components, including an adjustable Under Voltage Lockout (UVLO) circuit, an adjustable Over Voltage Lockout (OVLO) circuit and an Over Current Protection (OCP) circuit. Each of these components provides an important function in helping to protect against an unpredictable electrical failure.
The adjustable Under Voltage Lockout (UVLO) circuit helps to prevent the system from drawing current at too low of a voltage level. It can detect when the system power is too low, and then cuts power to the connected device or system until the voltage level has risen to the appropriate level for operation. By preventing the system from attempting to operate at too low of a voltage level, overstressing and damage to the system components can be prevented.
The adjustable Over Voltage Lockout (OVLO) circuit helps to prevent the system from drawing current at too high of a voltage level. In the same public way as the UVLO, the OVLO will cut power to the connected device or system until the voltage level falls below the specified safety threshold. While a higher voltage level could potentially cause some increased stress on the system components, shutting off the power to the system prevents any type of catastrophic failure due to too high of a voltage.
The Over Current Protection (OCP) circuit monitors the current levels in the circuit and will shut off power before the current reaches an excessive level. Excessive current flow, if allowed to continue, could potentially cause damage to electrical components, as well as heat up, and potentially ignite, combustible materials. With OCP, the power is shut off in a quick and safe manner, preventing any type of damage to the system, as well as avoiding any sort of fire hazard.
The S-1000N42-I4T1U integrated circuit supervisor is a useful tool in helping to protect against electrical overvoltage, undervoltage, and overcurrent conditions. This device is especially useful in low-voltage applications where data lines and other delicate electronic components may be at risk of damage under certain circumstances. By combining the functions of a UVLO, OVLO, and OCP circuit into a single device, designers can easily protect against any type of electrical system failure, helping to mitigate the potential of damages, fires, and other risks associated with power system malfunctions.
The specific data is subject to PDF, and the above content is for reference
IC BATTERY BACKUPSupervisor Channel
VOLTAGE DETECTORSupervisor Open Drain or...
IC VOLT DETECTOR TO-92-3Supervisor Open ...
IC VOLT DETECTOR TO-92-3Supervisor Push-...
IC SUPERVISOR MPU 4.65V WD 8SOICSupervis...
IC SUPERVISOR 2.9V 4-USPSupervisor Open ...