S-1170B41PD-OUATFG

Introduction

The S-1170B41PD-OUATFG is a linear voltage regulator designed and manufactured by Toshiba. It is one of the many linear voltage regulators available on the market today. The S-1170B41PD-OUATFG is designed to provide a regulated output of 5.0V with a maximum total current output of 1.0A.

Application Fields

The S-1170B41PD-OUATFG is commonly used in a variety of electronic applications, including:

• Power supplies
• Computer systems
• Industrial and consumer electronics
• Electrical/electronics tools
• Consumer products
• Motor control equipment
• Healthcare equipment
• LED lighting applications.

In these applications, the S-1170B41PD-OUATFG can be used as an auxiliary power source or a main power supply, depending on the specific requirements of the system.

Working Principle

The S-1170B41PD-OUATFG is a linear voltage regulator, meaning it uses a series of resistors to regulate the output voltage. The circuit works by creating an output voltage which is always slightly lower than the input voltage, and then compensating for this difference by feeding the output voltage through a resistor. This resistor causes a small current to be induced in the output voltage. This current is used to increase the voltage of the output voltage, allowing it to reach the desired level.

In terms of physical build, the S-1170B41PD-OUATFG consists of an integrated circuit (IC) chip, inside of which is a series of resistors and capacitors. These components make up the internal circuitry of the regulator, which works by adjusting the output voltage based on the ratio between the input voltage and the output voltage. The IC chip is responsible for converting the input voltage into the regulated output voltage.

Conclusion

The S-1170B41PD-OUATFG is a linear voltage regulator designed and manufactured by Toshiba. It is commonly used in a variety of electronic applications, including power supplies, computer systems, industrial and consumer electronics, electrical/electronics tools, consumer products, motor control equipment, healthcare equipment, and LED lighting applications. The S-1170B41PD-OUATFG works by creating an output voltage which is slightly lower than the input voltage, and then compensating for this difference by feeding the output voltage through a resistor. This current is used to increase the voltage of the output voltage. The S-1170B41PD-OUATFG is a reliable and cost-effective solution for any application.