S-11L10A17-M5T1U

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The S-11L10A17-M5T1U is a high-performance, low-power linear voltage regulator manufactured by Texas Instruments. It is part of their family of PMIC (Power Management Integrated Circuits), specifically one of their Voltage Regulators – Linear devices. It is designed to provide a regulated output voltage of a wide range of VIN (Input Voltage) values, ranging from 4.5V to 20V for accuracy and reliability.

As is typical of linear voltage regulators, the S-11L10A17-M5T1U has a simple three terminal configuration. These terminals are an input (VIN) for the input power source, an output (VO) for the regulated output voltage, and a ground (GND). The S-11L10A17-M5T1U has a maximum output current of 1.1A, and the output voltage range is adjustable from 0.8V to 10V with a 2.2% accuracy. It is designed to operate with a wide operating temperature range of -40 to +125 C. It also offers a high level of stability, with a maximum output voltage ripple of 2mV peak-to-peak.

The S-11L10A17-M5T1U Voltage Regulator also comes with over-temperature protection, over-voltage protection, under-voltage lockout, and current limit features for a wide range of applications and environments. Its over-temperature protection limits chip to 125 Celcius, while its over-voltage protection shuts the device down if the input voltage is higher than the programmed threshold. It also enables the UVLO (Under Voltage Lockout) control to protect the regulator from inrush currents due to sudden changes in load. Additionally, the current limit feature will shut down the device when the output current reaches a programmed limit.

Generally, the S-11L10A17-M5T1U could be used in a variety of applications which require stable output voltages and current in the range of 4.5V to 20V. This includes consumer electronics, communications systems, automotive and industrial applications. For consumer applications, the S-11L10A17-M5T1U is commonly used in smartphones, wearables and tablets. For automotive applications, the S-11L10A17-M5T1U is used in the control electronics for seat adjusters and battery management systems. In addition, it is widely used in industrial applications for automated assembly lines, robotic containers and smart homes.

In terms of its working principle, the S-11L10A17-M5T1U Voltage Regulator works by comparing the feedback voltage at the output terminal to its reference voltage at pin 3. In response, it will adjust the output current as needed to maintain the regulated output voltage. This is done with the help of an internal error amplifier, which compares the voltages and actuates an adjustable current-limiting circuitry. This circuitry can be programmed over a wide range with an external resistor divider connected to the top and bottom pins. Additionally, the S-11L10A17-M5T1U also features a low-dropout (LDO) mode, which allows it to maintain a regulated output voltage with a very low input voltage.

In summary, the S-11L10A17-M5T1U is a high-performance, low-power linear voltage regulator from Texas Instruments. It features a wide input voltage range, adjustable output voltage range, stable output voltage, and over-temperature, over-voltage, under-voltage and current limit protection. It is primarily used in consumer electronics, automotive and industrial applications, and works by comparing feedback voltage at the output terminal to its reference voltage at pin 3. As such, it proves to be a reliable and efficient solution for a wide range of applications.

The specific data is subject to PDF, and the above content is for reference