S-1206B14-I6T2U

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

S-1206B14-I6T2U is a type of integrated circuit (IC) device typically used as a voltage or power linear regulator. They are designed to supply a specific and constant DC voltage, which is used by electronic components to properly operate. In this article, we will look at the application field, working principle and characteristics of S-1206B14-I6T2U.

Application Field

S-1206B14-I6T2U is mainly used to provide power and voltage regulation for electronics and micro-electronics. They are mainly found in circuit boards, controlling the output voltage levels. It can be used to provide 3.2V, 3.6V, 5V, 12V and other standard voltage levels on the output side, depending on its design. S-1206B14-I6T2U can be used to adjust the output voltage by adjusting the external feedback resistors.

Working Principle

S-1206B14-I6T2U works by maintaining a constant output voltage level. This is achieved by employing a series of control loops that monitor both the input and output voltages. The input voltage is monitored by analyzing the voltage drop across the line resistor. The output voltage is monitored by examining the voltage across the feedback resistors. From these two measured values, the control loop computes the current or power used, and then uses an error amplifier to adjust the output voltage according to a predetermined level.

The current or power used is regulated by either a sense resistor or a direct current mode control (DCM) circuit. If a sense resistor is used, the voltage across the sense resistor is monitored and the current output is adjusted accordingly. If a DCM circuit is used, then current is monitored directly and the power output is adjusted.

On the output side, a Series regulator can be used to limit the maximum output current. In addition, Load regulation can also be used to adjust the output voltage depending on the load current. Finally, the output voltage can be trimmed to a particular value by the use of the on-board trimming resistors.

Characteristics

S-1206B14-I6T2U has a typical output voltage range from 2.8V to 5.0V and a maximum output current of 1.5A. It also provides a line regulation of 6mV and load regulation of 20mV, ensuring that the output voltage remains constant across a wide range of input voltages and loads. The efficiency of S-1206B14-I6T2U is typically at 80% or higher, resulting in low power dissipation.

In addition, S-1206B14-I6T2U also has an Enable pin, which can be used to turn the voltage regulator on/off. A small resistor can be used to set the normal operating frequency and a soft start control is also available. The soft start prevents the regulator from in-rush current that could damage the circuit. Finally, the S-1206B14-I6T2U also supports over current protection and thermal shutdown.

S-1206B14-I6T2U is a versatile and reliable low-cost voltage regulator, providing accurate output voltage regulation for a variety of applications. With its wide range of features, it is a great choice for those who need a reliable and cost-effective voltage regulator for their circuit board projects.

The specific data is subject to PDF, and the above content is for reference